Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for 12.3 Inch Display) › from 2020.11
RM37A0E _56 Audio / Visual / Telematics _086878 NAVIGATION / MULTI INFO DISPLAY _0444619 NAVIGATION SYSTEM(for 12.3 Inch Display) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for 12.3 Inch Display)  Data Signal Circuit between Radio Receiver and Stereo Jack Adapter  


DESCRIPTION

The No. 1 stereo jack adapter assembly sends the sound data signal or image data signal from a USB device to the radio receiver assembly via this circuit.

WIRING DIAGRAM

E429903E01
1.344,0.5 1.521,0.677 0.177,0.177 10 false 9 0.875,1.458 1.49,1.656 0.615,0.198 10 false UDO+ 0.906,2.219 1.521,2.417 0.615,0.198 10 false UJSS 5.906,2.219 6.521,2.417 0.615,0.198 10 false USG1 5.906,1.458 6.521,1.656 0.615,0.198 10 false US1+ 5.906,0.656 6.521,0.854 0.615,0.198 10 false US1- 0.042,2.688 0.656,2.885 0.615,0.198 10 false H15 0.052,2.865 2.542,3.146 2.49,0.281 10 false No. 1 Stereo Jack Adapter Assembly 2.479,3.271 5.083,3.5 2.604,0.229 10 false : USB Communication Line 3.552,1.76 4.188,1.979 0.635,0.219 10 false * 5.51,2.688 6.125,2.885 0.615,0.198 10 false H101 5.51,2.885 7.156,3.146 1.646,0.26 10 false Radio Receiver Assembly 5.729,0.542 5.906,0.719 0.177,0.177 10 false 2 1.333,1.323 1.51,1.5 0.177,0.177 10 false 10 1.354,2.094 1.531,2.271 0.177,0.177 10 false 12 5.75,2.115 5.927,2.292 0.177,0.177 10 false 5 5.74,1.323 5.917,1.5 0.177,0.177 10 false 3 0.906,0.656 1.521,0.854 0.615,0.198 10 false UDO- 0.281,3.281 1.125,3.51 0.844,0.229 10 false *: Shielded

PROCEDURE

1.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
a.

Disconnect the H101 radio receiver assembly connector.


b.

Disconnect the H15 No. 1 stereo jack adapter assembly connector.


c.
E429894C04
1.563,2.219 1.906,2.458 0.344,0.24 1.542,0.208 1.958,0.479 0.417,0.271 2.135,1.938 1.781,1.49 false 1.844,1.354 2.26,1.5 false 1.115,1.667 1.583,1.313 false 1.417,4.083 1.656,3.76 false 0.969,4.063 1.646,3.667 false 2.135,4 1.792,3.656 false 0.24,0.188 0.552,0.385 0.313,0.198 10 false *a 0.24,2.802 0.552,3 0.313,0.198 10 false *b 0.76,1.625 1.188,1.833 0.427,0.208 10 false US1+ 2.188,1.906 2.677,2.146 0.49,0.24 10 false USG1 2.313,1.438 2.729,1.688 0.417,0.25 10 false US1- 0.635,4.021 1.031,4.281 0.396,0.26 10 false UDO- 1.24,4.094 1.74,4.354 0.5,0.26 10 false UJSS 2.167,3.938 2.604,4.198 0.438,0.26 10 false UDO+ 1.583,0.271 2.042,0.469 0.458,0.198 10 false H101 1.625,2.26 1.938,2.458 0.313,0.198 10 false H15
*a Front view of wire harness connector
(to Radio Receiver Assembly)
*b Front view of wire harness connector
(to No. 1 Stereo Jack Adapter Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
H101-2 (US1-) - H15-9 (UDO-) Always Below 1 Ω
H101-3 (US1+) - H15-10 (UDO+) Always Below 1 Ω
H101-5 (USG1) - H15-12 (UJSS) Always Below 1 Ω
H101-2 (US1-) or H15-9 (UDO-) - Body ground Always 10 kΩ or higher
H101-3 (US1+) or H15-10 (UDO+) - Body ground Always 10 kΩ or higher
H101-5 (USG1) or H15-12 (UJSS) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR