This circuit includes the navigation ECU and radio receiver assembly.
Disconnect the H6 radio receiver assembly connector.
Disconnect the H18 navigation ECU connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| H6-7 (SUP) - H18-21 (SUP) | Always | Below 1 Ω |
| H6-7 (SUP) or H18-21 (SUP) - Body ground | Always | 10 kΩ or higher |
| Proceed to |
|---|
| OK |
| NG |
OK
NG