Home › Engine / Hybrid System › CRUISE CONTROL › FRONT RADAR SENSOR SYSTEM › from 2020.11
RM37A0E _51 Engine / Hybrid System _086858 CRUISE CONTROL _0418324 FRONT RADAR SENSOR SYSTEM D

CRUISE CONTROL  FRONT RADAR SENSOR SYSTEM  UTILITY  


Front Beam Axis Adjustment


HINT:

Front Beam Axis Adjustment is used to calibrate the beam axis of millimeter wave radar sensor assembly.


a.

Perform Front Beam Axis Adjustment according to the display on the GTS.

Body Electrical > Front Radar Sensor > Utility
Tester Display
Front Beam Axis Adjustment
50005 429 4404


Front Beam Axis Misalignment Reading


HINT:

Front Beam Axis Misalignment Reading is used to check the amount of misalignment of the millimeter wave radar sensor assembly.


a.

Perform Front Beam Axis Misalignment Reading according to the display on the GTS.

Body Electrical > Front Radar Sensor > Utility
Tester Display
Front Beam Axis Misalignment Reading
50005 429 4405


Front Radar Acceleration Sensor Calibration


HINT:

Front Radar Acceleration Sensor Calibration is used to perform calibration of the acceleration sensor in the millimeter wave radar sensor assembly.


a.

Perform Front Radar Acceleration Sensor Calibration according to the display on the GTS.

Body Electrical > Front Radar Sensor > Utility
Tester Display
Front Radar Acceleration Sensor Calibration
50005 429 4506


Transition to Online Axis Alignment Mode


NOTICE:

This utility transitions to online axis alignment mode of the millimeter wave radar sensor assembly.


a.

Following the instructions on the GTS, perform "Transition to Online Axis Alignment Mode".

Body Electrical > Front Radar Sensor > Utility
Tester Display
Transition to Online Axis Alignment Mode
50005 429 2633