Home › Vehicle Exterior › VEHICLE PROXIMITY NOTIFICATION SYSTEM › VEHICLE PROXIMITY NOTIFICATION SYSTEM › from 2020.11
RM37A0E _59 Vehicle Exterior _094410 VEHICLE PROXIMITY NOTIFICATION SYSTEM _0448770 VEHICLE PROXIMITY NOTIFICATION SYSTEM D

VEHICLE PROXIMITY NOTIFICATION SYSTEM  VEHICLE PROXIMITY NOTIFICATION SYSTEM  OPERATION CHECK  


VEHICLE PROXIMITY NOTIFICATION SYSTEM OPERATION CHECK


a.

System operation check (vehicle stopped)

NOTICE:

Perform this check with the AUTO function (shift-linked function) of the electric parking brake system off.


i.

Apply the parking brake.


ii.

Turn the ignition switch to ON.


iii.

With the brake pedal depressed, confirm that the vehicle proximity notification system does not operate (does not produce a sound) when the shift lever is moved from P to N.


iv.

When the brake pedal is released, confirm that the vehicle proximity notification system operates for approximately 3 seconds (produces a sound).



b.

System operation check (vehicle being driven)

i.

Turn the ignition switch to ON.


ii.

Operate the EV drive mode switch (integration control and panel assembly (for 2WD) or pattern select switch assembly (for 4WD/AWD)) and drive the vehicle using EV drive mode.


iii.

When the shift lever is moved from P to D, confirm that the vehicle proximity notification system operates (produces a sound) when the vehicle is driven at speeds of 25 km/h (16 mph) or less using EV drive mode.