Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM › from 2020.11
RM37A0E _58 Vehicle Interior _086893 PRE-COLLISION _0418188 PRE-COLLISION SYSTEM C

PRE-COLLISION  PRE-COLLISION SYSTEM  U010087  Lost Communication with ECM/PCM "A" Missing Message  U012587  Lost Communication with Multi-axis Acceleration Sensor Module Missing Message  U012687  Lost Communication with Steering Angle Sensor Module Missing Message  U012987  Lost Communication with Brake System Control Module Missing Message  U013187  Lost Communication with Power Steering Control Module Missing Message  U029387  Lost Communication with Hybrid/EV Powertrain Control Module Missing Message  


DESCRIPTION

When a malfunction is detected between various ECUs and sensors, these DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
U010087 Lost Communication with ECM/PCM "A" Missing Message While the vehicle is being driven at 5 km/h (4 mph) or more, a communication error between the ECM and the forward recognition camera is detected for approximately 6 seconds or more. CAN communication system
U012587 Lost Communication with Multi-axis Acceleration Sensor Module Missing Message
for HV Model

While the vehicle is being driven at 5 km/h (4 mph) or more, a communication error between the yaw rate sensor and the forward recognition camera is detected for approximately 4 seconds or more.


for Gasoline Model

While the vehicle is being driven at 5 km/h (4 mph) or more, a communication error between the airbag sensor assembly and the forward recognition camera is detected for approximately 4 seconds or more.


CAN communication system
U012687 Lost Communication with Steering Angle Sensor Module Missing Message 3 seconds or more after the ignition switch is turned to ON, a communication error between the steering sensor and the forward recognition camera is detected for approximately 1 second or more. CAN communication system
U012987 Lost Communication with Brake System Control Module Missing Message
for HV Model

3 seconds or more after the ignition switch is turned to ON, a communication error between the No. 2 skid control ECU (brake actuator assembly) and the forward recognition camera is detected for approximately 1 second or more.


for Gasoline Model

3 seconds or more after the ignition switch is turned to ON, a communication error between the skid control ECU (brake actuator assembly) and the forward recognition camera is detected for approximately 1 second or more.


CAN communication system
U013187 Lost Communication with Power Steering Control Module Missing Message 3 seconds after the ignition switch is turned to ON, a communication error between the power steering ECU (rack and pinion power steering gear assembly) and the forward recognition camera is detected for approximately 2 second or more. CAN communication system
U029387 Lost Communication with Hybrid/EV Powertrain Control Module Missing Message While the vehicle is being driven at 5 km/h (4 mph) or more, a communication error between the hybrid vehicle control ECU and the forward recognition camera is detected for approximately 6 seconds or more. CAN communication system

PROCEDURE

1.CHECK FOR DTCs
a.

Clear the DTCs.

Body Electrical > Pre-Collision System > Clear DTCs
50002 432

b.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



c.

Check for DTCs.

Body Electrical > Pre-Collision System > Trouble Codes
50001 432
OK:

DTCs are not output.



Result:
Proceed to
OK
NG



OK

NG