Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER (for RHD) › from 2020.11
RM37A0E _54 Brake _086869 BRAKE SYSTEM (OTHER) _0449077 BRAKE MASTER CYLINDER(for RHD) A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER(for RHD)  DISASSEMBLY  


PROCEDURE

Hide 47210U 1.REMOVE BRAKE MASTER CYLINDER STRAIGHT PIN

a.

Secure the brake master cylinder sub-assembly in a vise.

NOTICE:

Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.



b.
C447363

Using a 5 mm pin punch and a hammer, tap out the brake master cylinder straight pin from the brake master cylinder sub-assembly.


Hide 47202 2.REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

a.

Remove the brake master cylinder reservoir sub-assembly from the brake master cylinder body.


Hide 47255 3.REMOVE MASTER CYLINDER RESERVOIR GROMMET

a.
C447364

Remove the 2 master cylinder reservoir grommets from the brake master cylinder body.


b.

Remove the brake master cylinder body from the vise.