Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER (for RHD) › from 2020.11
RM37A0E _54 Brake _086869 BRAKE SYSTEM (OTHER) _0449077 BRAKE MASTER CYLINDER(for RHD) A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER(for RHD)  REASSEMBLY  


PROCEDURE

Hide 47255 1.INSTALL MASTER CYLINDER RESERVOIR GROMMET

a.
C447365C01
0,0 0,0 false
V100144

Lithium Soap Base Glycol Grease


Apply a light layer of lithium soap base glycol grease to the entire circumference of 2 new master cylinder reservoir grommets.


b.

Install the 2 master cylinder reservoir grommets to the brake master cylinder body.


Hide 47202 2.INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

a.

Secure the brake master cylinder body in a vise.

NOTICE:

Place aluminum plates on the vise to prevent damage to the brake master cylinder body.



b.

Install the brake master cylinder reservoir sub-assembly to the brake master cylinder body.


Hide 47210U 3.INSTALL BRAKE MASTER CYLINDER STRAIGHT PIN

a.
C447363

Using a 5 mm pin punch and a hammer, tap in the brake master cylinder straight pin to secure the brake master cylinder reservoir sub-assembly.


b.

Remove the brake master cylinder sub-assembly from the vise.