Home › Drivetrain › P810 (HYBRID TRANSMISSION / TRANSAXLE) › SHIFT PADDLE SWITCH › from 2020.11
RM37A0E _52 Drivetrain _086860 P810 HYBRID TRANSMISSION / TRANSAXLE _0449554 SHIFT PADDLE SWITCH G

P810 HYBRID TRANSMISSION / TRANSAXLE  SHIFT PADDLE SWITCH  INSPECTION  


PROCEDURE

Hide 1.INSPECT SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)

a.

No. 1 transmission shift switch assembly:

i.
C370677C03
1,1.667 1.417,1.167 true 1.5,1.667 1.667,1.167 true 2.5,1.667 2,1.167 true 0.167,0.167 0.479,0.323 0.313,0.156 10 false *a 0.781,1.667 1.396,1.865 0.615,0.198 10 false ECC1 1.354,1.667 1.969,1.865 0.615,0.198 10 false ECC 2.396,1.667 3.01,1.865 0.615,0.198 10 false SDN
*a Component without harness connected
(No. 1 Transmission Shift Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (SDN) - 2 (ECC) "-" (Down shift) shift paddle switch operated and held Below 2.5 Ω
"-" (Down shift) shift paddle switch not operated 1 MΩ or higher
1 (SDN) - 3 (ECC1) "-" (Down shift) shift paddle switch operated and held Below 2.5 Ω
"-" (Down shift) shift paddle switch not operated 1 MΩ or higher


If the result is not as specified, replace the No. 1 transmission shift switch assembly.



b.

No. 2 transmission shift switch assembly:

i.
C370677C04
1.5,1.667 1.667,1.167 true 2.167,1.667 2,1.167 true 0.167,0.167 0.479,0.323 0.313,0.156 10 false *a 1.354,1.667 1.969,1.865 0.615,0.198 10 false ECC 2.042,1.667 2.656,1.865 0.615,0.198 10 false SUP
*a Component without harness connected
(No. 2 Transmission Shift Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (SUP) - 2 (ECC) "+" (Up shift) shift paddle switch operated and held Below 2.5 Ω
"+" (Up shift) shift paddle switch not operated 1 MΩ or higher


If the result is not as specified, replace the No. 2 transmission shift switch assembly.