Home › Drivetrain › UA80E (AUTOMATIC TRANSMISSION / TRANSAXLE) › SHIFT LEVER KNOB › from 2020.11
RM37A0E _52 Drivetrain _094409 UA80E AUTOMATIC TRANSMISSION / TRANSAXLE _0449684 SHIFT LEVER KNOB A

UA80E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER KNOB  REMOVAL  


PROCEDURE

Hide 33504F 1.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

a.
C449163

Disengage the 2 claws to disconnect the shifting hole cover sub-assembly as shown in the illustration.


b.
C449164C01
2.688,0.792 2.542,0.625 2.542,0.625 2.365,0.625 true 1.281,1.469 1.281,1.188 true 2.208,0.531 2.396,0.729 0.188,0.198 10 false *a 1.219,1.49 1.458,1.688 0.24,0.198 10 true *b
*a Clip
*b Protective Tape


Using a screwdriver with its tip wrapped with protective tape, expand the left side of the clip and remove the shift lever knob sub-assembly from the transmission floor shift assembly as shown in the illustration.

NOTICE:

Be careful not to damage the shift lever knob sub-assembly.