Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT DIMMER SWITCH › from 2020.11
RM37A0E _59 Vehicle Exterior _086888 LIGHTING (EXT) _0416596 HEADLIGHT DIMMER SWITCH G

LIGHTING (EXT)  HEADLIGHT DIMMER SWITCH  INSPECTION  


PROCEDURE

Hide 84329 1.INSPECT TURN SIGNAL SWITCH (for Turn Signal Switch LH Side Type)

a.

Resistance Check

i.
E361302C90
1.615,1.01 1.531,0.333 true 1.417,1 1.167,0.333 true 2.021,1.01 2.271,0.333 true 2.198,1 2.615,0.333 true 1.188,2 1.438,1.417 true 1.552,2 1.635,1.417 true 1.917,2 1.833,1.417 true 2.417,1 3,0.333 true 2.479,2 2.229,1.417 true 2.833,2 2.417,1.417 true 2.198,2 2.031,1.417 true 1.833,1 1.917,0.333 true 0.167,0.177 0.479,0.333 0.313,0.156 10 false *a 1.417,0.167 1.573,0.365 0.156,0.198 10 false H 3.042,0.167 3.281,0.417 0.24,0.25 10 false HU 2.573,0.167 3.073,0.417 0.5,0.25 10 false L_OFF 1.083,1.917 1.24,2.115 0.156,0.198 10 false T 2.854,1.917 3.167,2.115 0.313,0.198 10 false TR 1,0.167 1.24,0.417 0.24,0.25 10 false HF 1.979,1.917 2.292,2.115 0.313,0.198 10 false EL 2.313,0.167 2.625,0.365 0.313,0.198 10 false TL 2.521,1.917 2.833,2.115 0.313,0.198 10 false A 2.229,1.917 2.542,2.115 0.313,0.198 10 false CR 1.417,1.917 1.729,2.115 0.313,0.198 10 false B 1.792,0.167 2.25,0.365 0.458,0.198 10 false BFG
*a Component without harness connected
(Turn Signal Switch)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Light Control Switch
Tester Connection Condition Specified Condition

*1: w/ Light Control Switch OFF Position

2 (L_OFF) - 12 (EL) Light control switch in OFF position*1 Below 1 Ω
10 (A) - 12 (EL) Light control switch in AUTO position Below 1 Ω
14 (T) - 12 (EL) Light control switch in tail position Below 1 Ω
5 (H) - 12 (EL) Light control switch in head position Below 1 Ω

Dimmer Passing Switch
Tester Connection Condition Specified Condition
6 (HF) - 12 (EL) Dimmer switch in high flash position Below 1 Ω
1 (HU) - 12 (EL) Dimmer switch in high position Below 1 Ω

Fog Light Switch
Tester Connection Condition Specified Condition
4 (BFG) - 12 (EL) Fog light switch in front position Below 1 Ω
13 (B) - 12 (EL) Fog light switch in rear position Below 1 Ω

Turn Signal Switch
Tester Connection Condition Specified Condition
9 (TR) - 12 (EL) Turn signal switch in neutral position 10 kΩ or higher
3 (TL) - 12 (EL) Turn signal switch in neutral position 10 kΩ or higher
9 (TR) - 12 (EL) Turn signal switch in right turn position Below 1 Ω
9 (TR) - 12 (EL) Turn signal switch in full right turn position Below 1 Ω
9 (TR) - 11 (CR) Turn signal switch in full right turn position Below 1 Ω
11 (CR) - 12 (EL) Turn signal switch in full right turn position Below 1 Ω
3 (TL) - 12 (EL) Turn signal switch in left turn position Below 1 Ω
3 (TL) - 12 (EL) Turn signal switch in full left turn position Below 1 Ω
3 (TL) - 11 (CR) Turn signal switch in full left turn position Below 1 Ω
11 (CR) - 12 (EL) Turn signal switch in full left turn position Below 1 Ω


If the result is not as specified, replace the turn signal switch.

HINT:
·

The left turn or right turn condition indicates a condition in which the turn signal switch will return to the neutral position after releasing your hand from the turn signal switch (turn signal switch is operated approximately 6.3°).

·

The full left turn or full right turn condition indicates a condition in which the turn signal switch will not return to the neutral position after releasing your hand from the turn signal switch (turn signal switch is operated 10.5°).





Hide 84329 2.INSPECT TURN SIGNAL SWITCH (for Turn Signal Switch RH Side Type)

a.

Resistance Check

i.
E454735C01
1.573,0.344 1.625,1.052 true 0.969,0.333 1.229,1.01 true 2.25,0.333 2.021,1.021 true 1.833,1.417 2.01,1.906 true 1.26,0.354 1.417,1.021 true 0.719,0.365 1.021,1.042 true 2.01,1.417 2.323,1.896 true 1.625,1.396 1.51,1.896 true 1.427,1.396 1.146,1.896 true 1.021,1.396 0.708,1.875 true 1.51,0.177 1.823,0.375 0.313,0.198 10 false EL 1.99,1.927 2.219,2.115 0.229,0.188 10 false H 0.917,0.188 1.125,0.365 0.208,0.177 10 false A 2.26,0.167 2.448,0.354 0.188,0.188 10 false T 0.104,0.115 0.417,0.271 0.313,0.156 10 false *a 1.167,0.177 1.479,0.375 0.313,0.198 10 false CR 0.604,0.198 0.833,0.375 0.229,0.177 10 false TR 2.313,1.927 2.563,2.115 0.25,0.188 10 false HF 1.396,1.938 1.906,2.115 0.51,0.177 10 false BFG 1.031,1.927 1.51,2.104 0.479,0.177 10 false TL 0.583,1.906 0.813,2.094 0.229,0.188 10 false HU
*a Component without harness connected
(Turn Signal Switch)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Light Control Switch
Tester Connection Condition Specified Condition
7 (A) - 5 (EL) Light control switch in AUTO position Below 1 Ω
3 (T) - 5 (EL) Light control switch in tail position Below 1 Ω
12 (H) - 5 (EL) Light control switch in head position Below 1 Ω

Dimmer Switch
Tester Connection Condition Specified Condition
11 (HF) - 5 (EL) Dimmer switch in high flash position Below 1 Ω
16 (HU) - 5 (EL) Dimmer switch in high position Below 1 Ω

Fog Light Switch
Tester Connection Condition Specified Condition
13 (BFG) - 5 (EL) Fog light switch in front position Below 1 Ω

Turn Signal Switch
Tester Connection Condition Specified Condition
8 (TR) - 5 (EL) Turn signal switch in neutral position 10 kΩ or higher
14 (TL) - 5 (EL) Turn signal switch in neutral position 10 kΩ or higher
8 (TR) - 5 (EL) Turn signal switch in right turn position Below 1 Ω
8 (TR) - 5 (EL) Turn signal switch in full right turn position Below 1 Ω
8 (TR) - 6 (CR) Turn signal switch in full right turn position Below 1 Ω
6 (CR) - 5 (EL) Turn signal switch in full right turn position Below 1 Ω
14 (TL) - 5 (EL) Turn signal switch in left turn position Below 1 Ω
14 (TL) - 5 (EL) Turn signal switch in full left turn position Below 1 Ω
14 (TL) - 6 (CR) Turn signal switch in full left turn position Below 1 Ω
6 (CR) - 5 (EL) Turn signal switch in full left turn position Below 1 Ω


HINT:
·

The left turn or right turn condition indicates a condition in which the turn signal switch will return to the neutral position after releasing your hand from the turn signal switch (turn signal switch is operated approximately 6.3°).

·

The full left turn or full right turn condition indicates a condition in which the turn signal switch will not return to the neutral position after releasing your hand from the turn signal switch (turn signal switch is operated 10.5°).



If the result is not as specified, replace the turn signal switch.