Home › Engine / Hybrid System › STOP AND START › VACUUM SENSOR ASSEMBLY › from 2020.11
RM37A0E _51 Engine / Hybrid System _094408 STOP AND START _0452243 VACUUM SENSOR ASSEMBLY G

STOP AND START  VACUUM SENSOR ASSEMBLY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 89420H 1.INSPECT VACUUM SENSOR ASSEMBLY

a.

Start the engine.


b.

Turn the ignition switch off.


c.

Turn the ignition switch to ON.


d.

Compare the "Brake Boost Pressure" values before and after the brake pedal was depressed 5 times.

Powertrain > Stop and Start > Data List
Tester Display
Brake Boost Pressure
50003 392 215
Standard:

Internal pressure changes by 20 kPa (0.2 kg(f)/cm2, 2.9 psi) or more.


If the result is not as specified, replace the vacuum sensor assembly.