Home › Vehicle Interior › SEAT › FRONT POWER SEAT MOTOR ASSEMBLY › from 2020.11
RM37A0E _58 Vehicle Interior _086894 SEAT _0416493 FRONT POWER SEAT MOTOR ASSEMBLY A

SEAT  FRONT POWER SEAT MOTOR ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
B543257

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The following procedure is for LHD vehicles.

·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1.INSTALL POWER SEAT TILT MOTOR ASSEMBLY

a.
B564762N01
2.396,0.198 2.552,0.396 0.156,0.198 10 true A 0.938,0.771 1.094,0.969 0.156,0.198 10 true B 2.573,0.625 2.729,0.823 0.156,0.198 10 true B

Install the power seat tilt motor assembly with the 3 bolts.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)

NOTICE:

Bolt (A) is shorter than bolt (B). Make sure to install them to the correct positions.



Hide 2.INSTALL POWER SEAT LIFTER MOTOR ASSEMBLY

a.

Install the power seat lifter motor assembly.

i.
B564970C01
1.281,0.667 1.281,0.24 1.281,0.24 0.51,0.24 true 0.469,1.271 0.469,0.656 0.469,0.656 1.063,0.656 true 1.677,0.563 1.677,0.24 1.677,0.24 2.573,0.24 true 1.958,0.646 1.958,0.99 1.958,0.99 2.594,0.99 true 0.354,0.146 0.667,0.302 0.313,0.156 10 false *a 0.385,1.25 0.698,1.406 0.313,0.156 10 true *b 2.583,0.896 2.896,1.052 0.313,0.156 10 true *c 2.583,0.156 2.896,0.313 0.313,0.156 10 true *d
*a Stud Bolt of the Front Seat Vertical Housing Sub-assembly
*b Hole of the Front Seat Adjuster Assembly
*c Front Seat Vertical Housing Sub-assembly
*d Front Seat Adjuster Assembly


Install the front seat vertical housing sub-assembly.

NOTICE:
·

Make sure to insert the stud bolt of the front seat vertical housing sub-assembly into the hole of the front seat adjuster assembly as shown in the illustration.

·

Make sure to position the front seat adjuster assembly so that when the front seat vertical housing sub-assembly is installed, their gears will be positioned as shown in the illustration.




ii.
B564760

Install the vertical adjuster spacer.


iii.
B564759N01
2.146,0.104 2.302,0.302 0.156,0.198 10 false 1 0.875,0.875 1.031,1.073 0.156,0.198 10 true 2 2.24,1.729 2.396,1.927 0.156,0.198 10 true 3

Install the front seat adjuster plate with the 3 nuts.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)

NOTICE:

Tighten the nuts in the order shown in the illustration.




Hide 71876 4.INSTALL RECLINING ADJUSTER INSIDE COVER LH (for LH Side)

Hide 5.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

Hide 6.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

Hide 71862 7.INSTALL FRONT SEAT INNER CUSHION SHIELD

Hide 71812D 8.INSTALL FRONT SEAT CUSHION SHIELD

Hide 71868N 9.INSTALL FRONT SEAT FRONT CUSHION SHIELD

Hide 71074S 10.CONNECT SEPARATE TYPE FRONT SEATBACK COVER