Home › Vehicle Interior › MIRROR (INT) › DIGITAL INNER MIRROR › from 2020.11
RM37A0E _58 Vehicle Interior _086890 MIRROR (INT) _0452769 DIGITAL INNER MIRROR G

MIRROR (INT)  DIGITAL INNER MIRROR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 87810 1.INSPECT INNER REAR VIEW MIRROR ASSEMBLY

NOTICE:
·

Perform this inspection indoors.

·

When anti-glare is not operating, the mirror surface is bright. When anti-glare is operating, the mirror surface is darkened.



a.

Turn the ignition switch to ON.


b.
B601806C01
1.167,1.802 1.167,1.552 true 1.083,1.781 1.323,1.979 0.24,0.198 10 true *a 2.385,1.604 2.594,1.781 0.208,0.177 10 false *b 3.135,1.656 3.333,1.833 0.198,0.177 10 false *c
*a Mode Selection Lever
*b Digital Mirror Mode
*c Optical Mirror Mode


Confirm that the mode selection lever is set to the optical mirror mode side.

HINT:

If the mode selection lever is set to the digital mirror mode side, move it to the optical mirror mode side.



c.
B601807C01
1.417,1.854 1.417,1.583 true 1.781,1.24 1.948,0.906 true 2.125,1.24 2.292,0.906 true 2.104,1.573 1.917,1.833 1.917,1.833 1.771,1.573 true 2.219,1.292 2.469,1.292 true 1.333,1.844 1.646,2.042 0.313,0.198 10 false *a 1.844,1.865 2.156,2.063 0.313,0.198 10 false *b 2.323,0.823 2.635,1.021 0.313,0.198 10 false *e 2.49,1.208 2.802,1.406 0.313,0.198 10 false *c 1.969,0.833 2.281,1.031 0.313,0.198 10 false *d
*a Menu/Select Switch
*b Cursor Operation Switch
*c Cursor
*d Automatic Anti-glare Mode OFF
*e Automatic Anti-glare Mode ON


Operate the menu/select switch and confirm that the cursor is in the location shown in the illustration and that anti-glare is not operating.

HINT:
·

If the cursor is in the location shown in the illustration, automatic anti-glare mode is on and anti-glare is not operating.

·

If the cursor is in a location other than that shown in the illustration, move the cursor to the location shown in the illustration using the menu/select and cursor operation switches.

·

Depending on the ambient conditions, anti-glare may operate.




d.
B601808C01
2.198,1.344 2.281,1.677 2.281,1.677 2.365,1.344 true 0.771,3.125 0.771,2.792 true 2.042,1.677 2.042,1.344 true 1.885,1.688 1.885,1.354 true 1.969,1.656 2.281,1.854 0.313,0.198 10 false *c 1.802,1.698 2.115,1.896 0.313,0.198 10 false *b 0.688,3.115 1,3.313 0.313,0.198 10 false *a 2.188,1.688 2.5,1.885 0.313,0.198 10 false *d
*a Ambient Light Sensor
*b Rearward Facing Light Sensor
*c Menu/Select Switch
*d Cursor Operation Switch


Using the menu/select switch and cursor operation switches, turn off automatic anti-glare mode.

HINT:

When automatic anti-glare mode is off, anti-glare does not operate regardless of the ambient conditions.



e.

Using the menu/select switch and cursor operation switches, turn on automatic anti-glare mode.


f.

While covering the ambient light sensor with your hand, shine a light on the rearward facing light sensor and confirm that anti-glare operates.


g.

Remove your hand from the sensor and stop shining the light at the rearward facing light sensor and confirm that anti-glare stops operating.

NOTICE:

If the system does not operate as indicated above, perform the test several times with the digital inner mirror at different angles or with different ambient conditions.