Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Gasoline Model with Automatic Air Conditioning System) › from 2020.11
RM37A0E _58 Vehicle Interior _086896 HEATING / AIR CONDITIONING _0420833 AIR CONDITIONING SYSTEM(for Gasoline Model with Automatic Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Gasoline Model with Automatic Air Conditioning System)  B14B2  Lost Communication with Front Panel LIN  


DESCRIPTION

The air conditioning control assembly communicates with the air conditioning amplifier assembly via LIN communication.

If a malfunction occurs in the LIN communication system, the air conditioning amplifier assembly will not operate even if the air conditioning control assembly is operated.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory
B14B2 Lost Communication with Front Panel LIN Lost communication with air conditioning control assembly
·

Harness or connector

·

Air conditioning control assembly

·

Air conditioning amplifier assembly


Memorized
(10 sec. or more)*

*: The air conditioning amplifier assembly stores this DTC if the malfunction has occurred for the period of time indicated in the brackets.

WIRING DIAGRAM

E437128E02
3.688,2.219 4.031,2.417 0.344,0.198 10 false IG+ 4.438,3.198 4.875,3.396 0.438,0.198 10 false LIN1 3.688,3.615 4.167,3.823 0.479,0.208 10 false GND 3.5,2.104 3.813,2.302 0.313,0.198 10 false 6 4.813,3.01 5.125,3.208 0.313,0.198 10 false 8 3.448,3.5 3.76,3.698 0.313,0.198 10 false 10 3.333,3.958 3.771,4.156 0.438,0.198 10 false H27 3.323,4.125 4.76,4.521 1.438,0.396 10 false Air Conditioning Control Assembly 5.26,3.198 5.698,3.396 0.438,0.198 10 false H62 5.385,4.094 6.938,4.479 1.552,0.385 10 false Air Conditioning Amplifier Assembly 5.677,3.188 6.115,3.385 0.438,0.198 10 false LIN1 5.354,2.99 5.625,3.177 0.271,0.188 10 false 7 0.656,4.323 2.313,4.531 1.656,0.208 10 false : LIN Communication Line 2.51,2.365 3.646,2.594 1.135,0.229 10 false ECU-IG1 NO. 4 0.594,2.219 2,2.448 1.406,0.229 10 false from IG1-NO. 1 Relay 1.844,0.813 3.25,1.042 1.406,0.229 10 false from IG1-NO. 1 Relay 3.74,0.948 4.875,1.177 1.135,0.229 10 false ECU-IG1 NO. 4 5.677,0.813 6.021,1.01 0.344,0.198 10 false IG+ 5.677,0.385 6.021,0.583 0.344,0.198 10 false B 5.667,1.229 6.01,1.427 0.344,0.198 10 false GND 3.813,0.531 4.781,0.74 0.969,0.208 10 false ECU-B NO. 2 2.208,0.396 3.354,0.594 1.146,0.198 10 false from AM2 Fuse 5.26,1.24 5.698,1.438 0.438,0.198 10 false H62 5.26,0.813 5.698,1.01 0.438,0.198 10 false H62 5.26,0.396 5.698,0.594 0.438,0.198 10 false H62 5.313,1.042 5.583,1.229 0.271,0.188 10 false 17 5.344,0.625 5.615,0.813 0.271,0.188 10 false 6 5.354,0.188 5.625,0.375 0.271,0.188 10 false 5 0.354,1.521 2.604,1.781 2.25,0.26 10 false from Engine Stop and Start ECU 2.927,1.417 3.24,1.615 0.313,0.198 10 false *1 2.938,2.063 3.25,2.26 0.313,0.198 10 false *2 0.302,2.948 2.406,3.156 2.104,0.208 10 false *1: w/ Stop and Start System 0.313,3.302 2.635,3.49 2.323,0.188 10 false *2: w/o Stop and Start System

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following procedure.


PROCEDURE

1.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING CONTROL ASSEMBLY - BATTERY AND BODY GROUND)
a.

Disconnect the H27 air conditioning control assembly connector.


b.
E432371C02
1.469,0.083 1.969,0.333 0.5,0.25 1.323,1.219 0.844,1.052 true 2.115,1.229 2.51,1.042 true 1.604,0.125 2.031,0.333 0.427,0.208 10 false H27 2.563,0.948 2.99,1.156 0.427,0.208 10 false GND 0.573,0.958 1,1.167 0.427,0.208 10 false IG+ 0.615,0.177 1.042,0.385 0.427,0.208 10 false *a
*a Front view of wire harness connector
(to Air Conditioning Control Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
H27-10 (GND) - Body ground Always Below 1 Ω



c.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition

*1: w/o Stop and Start System

*2: w/ Stop and Start System

H27-4 (IG+) - Body ground Ignition switch ON 11 to 14 V*1
10.5 to 16 V*2
Ignition switch off Below 1 V



Result:
Proceed to
OK
NG



OK

2.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - AIR CONDITIONING CONTROL ASSEMBLY)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

2.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - AIR CONDITIONING CONTROL ASSEMBLY)
a.

Disconnect the H62 air conditioning amplifier assembly connector.


b.

Disconnect the H27 air conditioning control assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
H62-7 (LIN1) - H27-8 (LIN1) Always Below 1 Ω
H62-7 (LIN1) or H27-8 (LIN1) - Other terminals and body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

3.CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY (OUTPUT)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY (OUTPUT)
a.

Connect the H62 air conditioning amplifier assembly connector.


b.

Disconnect the H27 air conditioning control assembly connector.


c.

Using an oscilloscope, check the waveform.

E432372C01
5.156,0.115 5.583,0.385 0.427,0.271 5.927,1.969 5.74,1.063 true 5.25,0.167 5.708,0.365 0.458,0.198 10 false H62 2.219,3.229 2.677,3.427 0.458,0.198 10 false GND 5.833,2 6.292,2.198 0.458,0.198 10 false LIN1 4.656,0.115 4.969,0.313 0.313,0.198 10 false *a
*a Component with harness connected
(Air Conditioning Amplifier Assembly)
- -


Item Content
Tester Connection H62-7 (LIN1) - Body ground
Tool Setting 2 V/DIV., 20 μs/DIV.
Condition Ignition switch ON

OK:

The waveform displays properly.



Result:
Proceed to
OK
NG



OK

REPLACE AIR CONDITIONING CONTROL ASSEMBLY

NG

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY