Check from the rear of the connector while it is connected to the components.
INTEGRATION CONTROL SUB-ASSEMBLY
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| H8-1 (B) - H8-20 (GND) | Power source (+B) | Ignition switch off | 11 to 14 V |
| H8-3 (ACC) - H8-20 (GND) | Power source (ACC) | Ignition switch off | Below 1 V |
| Ignition switch ACC | 11 to 14 V | ||
| H8-4 (IG+) - H8-20 (GND) | Power source (IG) | Ignition switch off | Below 1 V |
| Ignition switch ON | 11 to 14 V | ||
| H8-5 (ILL+) - H8-20 (GND) | Illumination signal | Light control switch off | Light control switch in tail or head position |
| Ignition switch off
Light control switch in tail or head position |
11 to 14 V | ||
| H8-17 (VMTR) - H8-20 (GND) | Visual mute signal | Ignition switch ACC
Screen display changing |
3.5 V or higher → Below 1 V → 3.5 V or higher |
| H8-18 (TX+) - H8-20 (GND) | AVC-LAN communication signal | - | - |
| H8-20 (GND) - Body ground | Ground | Always | Below 1 Ω |
| H8-31 (CANN) | CAN communication signal | - | - |
| H8-32 (CANP) | CAN communication signal | - | - |
| H8-35 (TX1-) | AVC-LAN communication signal | - | - |
| H8-36 (TX1+) | AVC-LAN communication signal | - | - |
| H8-39 (VMTI) - H8-20 (GND) | Visual mute signal | Ignition switch ACC
Screen display changing |
3.5 V or higher → Below 1 V → 3.5 V or higher |
| H8-40 (TX-) - H8-20 (GND) | AVC-LAN communication signal | - | - |
| b2-1 (GV+) | Video signal (Digital) | - | - |
| b2-2 (GV-) | Video signal (Digital) | - | - |
| b2-3 (GVG) - Body ground | Shield ground | Always | Below 1 Ω |
| d6-1 (GV+) | Video signal (Digital) | - | - |
| d6-2 (GV-) | Video signal (Digital) | - | - |
| d6-3 (GVG) - Body ground | Shield ground | Always | Below 1 Ω |
MULTI-DISPLAY ASSEMBLY
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| H7-1 (CSW+) - H7-13 (GND1) | Terminal required by law | Panoramic image being displayed | 0 to 2 V |
| Panoramic image not being displayed | 5.5 to 7.05 V | ||
| H7-2 (ILL+) - H7-13 (GND1) | Illumination signal | Light control switch off | Below 1 V |
| Ignition switch off
Light control switch in tail or head position |
11 to 14 V | ||
| H7-7 (TX+) | AVC-LAN communication signal | - | - |
| H7-11 (VMTI) - H7-13 (GND1) | Visual mute signal | When image on display switches | 3.5 V or higher
→ Below 1 V → 3.5 V or higher |
| H7-12 (B) - H7-13 (GND1) | Power source (+B) | Ignition switch off | 11 to 14 V |
| H7-13 (GND1) - Body ground | Ground | Always | Below 1 Ω |
| H7-19 (TX-) | AVC-LAN communication signal | - | - |
| H7-24 (ACC) - H7-13 (GND1) | Power source (ACC) | Ignition switch off | Below 1 V |
| Ignition switch ACC | 11 to 14 V | ||
| d7-1 (GVI-) | Video signal (Digital) | - | - |
| d7-2 (GVI+) | Video signal (Digital) | - | - |
| d7-3 (GVG1) | Shield ground | - | - |
| H104-1 (GV+) | Video signal (Digital) | - | - |
| H104-2 (GV-) | Video signal (Digital) | - | - |
| H104-3 (GND) | Shield ground | - | - |
RADIO RECEIVER ASSEMBLY