CUSTOMIZE TOYOTA MULTI OPERATION TOUCH SYSTEM
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the GTS.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Customize Setting / Others.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Touch Panel Reaction Time Adjust (Multi Operation) | Touch panel reaction time | 140ms | 00:40ms,01:140ms,10:170ms,11:200ms | Integration control sub-assembly |
Customizing with the integration control sub-assembly.
Turn the ignition switch to ON.
Enter the "Setting" menu.
Select the setting by referring to the table below.
| Display | Description | Default | Setting | Relevant ECU |
|---|---|---|---|---|
| Slide Operation | ·
ON: Flick function enabled ·
OFF: Flick function disabled |
ON | ON or OFF | Integration control sub-assembly |