| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U0073 | Control Module Communication Bus "A" Off | CAN bus connection error | CAN communication system |
| U0100 | Lost Communication with ECM / PCM "A" | CAN reception error | CAN communication system |
| U0101 | Lost Communication with TCM | CAN reception error | CAN communication system |
| U0114 | Lost Communication with Four-Wheel Drive Clutch Control Module | CAN reception error | CAN communication system |
| U0125 | Lost Communication with Multi-axis Acceleration Sensor Module "A" | CAN reception error | CAN communication system |
| U0126 | Lost Communication with Steering Angle Sensor Module | CAN reception error | CAN communication system |
| U0129 | Lost Communication With Brake System Control Module "A" | CAN reception error | CAN communication system |
| U0140 | Lost Communication with Body Control Module | CAN reception error | CAN communication system |
| U0155 | Lost Communication with Instrument Panel Cluster (IPC) Control Module | CAN reception error | CAN communication system |
| U0163 | Lost Communication with Navigation Control Module | CAN reception error | CAN communication system |
| U0164 | Lost Communication with HVAC Control Module | CAN reception error | CAN communication system |
| U0293 | Lost Communication with Hybrid/EV Powertrain Control Module | CAN reception error
(for HV Model) |
CAN communication system |
Clear the DTCs.
Recheck for DTCs and check if the same DTC is output again.
No DTCs are output.
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
NG