Home › Vehicle Interior › SEAT › SEAT MEMORY SWITCH › from 2020.11
RM37A0E _58 Vehicle Interior _086894 SEAT _0416491 SEAT MEMORY SWITCH G

SEAT  SEAT MEMORY SWITCH  INSPECTION  


PROCEDURE

Hide 84927 1.INSPECT SEAT MEMORY SWITCH

a.
B596516C01
1.281,3 1.281,2.583 true 1.771,3 1.771,2.583 true 2.333,3 2.333,2.583 true 2.583,1.5 2.583,1.083 true 2.125,1.5 2.125,1.083 true 1.583,1.5 1.583,1.083 true 1.219,3.042 1.531,3.24 0.313,0.198 10 false *a 2.271,3.052 2.583,3.25 0.313,0.198 10 false *b 1.708,3.052 2.021,3.25 0.313,0.198 10 false *c 0.719,3.406 1.031,3.604 0.313,0.198 10 false *d 1.521,1.521 1.833,1.719 0.313,0.198 10 false *a 2.052,1.521 2.365,1.719 0.313,0.198 10 false *c 2.531,1.521 2.844,1.719 0.313,0.198 10 false *b 0.25,0.177 0.563,0.417 0.313,0.24 12 false *A 0.271,1.677 0.583,1.917 0.313,0.24 12 false *B
*A for LHD
*B for RHD
*a SET Switch
*b M1 Switch
*c M2 Switch
*d Component without harness connected
(Seat Memory Switch)


Measure the resistance according to the value(s) in the table below.

Standard Resistance (for LHD):
Tester Connection Condition Specified Condition
3 - 1 M1 switch pressed Below 1 Ω
M1 switch not pressed 10 kΩ or higher
4 - 1 M2 switch pressed Below 1 Ω
M2 switch not pressed 10 kΩ or higher
2 - 1 SET switch pressed Below 1 Ω
SET switch not pressed 10 kΩ or higher


Standard Resistance (for RHD):
Tester Connection Condition Specified Condition
3 - 1 M1 switch pressed Below 1 Ω
M1 switch not pressed 10 kΩ or higher
4 - 1 M2 switch pressed Below 1 Ω
M2 switch not pressed 10 kΩ or higher
2 - 1 SET switch pressed Below 1 Ω
SET switch not pressed 10 kΩ or higher


If the result is not as specified, replace the seat memory switch.