Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Seat Type LH Side) › from 2020.11
RM37A0E _58 Vehicle Interior _086895 SEAT BELT _0417482 REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type LH Side) G

SEAT BELT  REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type LH Side)  INSPECTION  


PROCEDURE

Hide 73480A 1.INSPECT REAR SEAT INNER BELT ASSEMBLY LH (w/o Occupant Detection Sensor)

a.
B561013C01
0.146,0.115 0.521,0.708 0.375,0.594 10 false *a
*a Component without harness connected
(Rear Seat Inner Belt Assembly LH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Rear No. 1 LH seat belt unfastened Below 1 Ω
Rear No. 1 LH seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the rear seat inner belt assembly LH.


Hide 73480A 2.INSPECT REAR SEAT INNER BELT ASSEMBLY LH (w/ Occupant Detection Sensor)

a.
B601257C01
1.531,0.135 1.917,0.406 0.385,0.271 1.469,2.396 1.854,2.667 0.385,0.271 0.094,0.083 0.406,0.281 0.313,0.198 10 false *a 1.656,0.198 1.969,0.396 0.313,0.198 10 false f6 1.615,2.438 1.927,2.635 0.313,0.198 10 false A
*a Component without harness connected
(Rear Seat Inner Belt Assembly LH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
f6-3 - A-1 Rear No. 1 LH seat belt unfastened Below 1 Ω
Rear No. 1 LH seat belt fastened 10 kΩ or higher
f6-5 - A-2 Always Below 1 Ω


If the result is not as specified, replace the rear seat inner belt assembly LH.