73580
1.INSPECT REAR NO. 2 SEAT INNER BELT ASSEMBLY RH (w/o Occupant Detection Sensor)
| *a | Component without harness connected
(Rear No. 2 Seat Inner Belt Assembly RH) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Rear No. 2 RH seat belt unfastened | Below 1 Ω |
| Rear No. 2 RH seat belt fastened | 10 kΩ or higher |
If the result is not as specified, replace the rear No. 2 seat inner belt assembly RH.
73580
2.INSPECT REAR NO. 2 SEAT INNER BELT ASSEMBLY RH (w/ Occupant Detection Sensor)
| *a | Component without harness connected
(Rear No. 2 Seat Inner Belt Assembly RH) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| C-1 - D-1 | Rear No. 2 RH seat belt unfastened | Below 1 Ω |
| Rear No. 2 RH seat belt fastened | 10 kΩ or higher | |
| C-2 - D-2 | Always | Below 1 Ω |
If the result is not as specified, replace the rear No. 2 seat inner belt assembly RH.