Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT INNER BELT ASSEMBLY › from 2020.11
RM37A0E _58 Vehicle Interior _086895 SEAT BELT _0417488 REAR CENTER SEAT INNER BELT ASSEMBLY G

SEAT BELT  REAR CENTER SEAT INNER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73380A 1.INSPECT REAR SEAT INNER BELT ASSEMBLY (w/o Occupant Detection Sensor)

a.
B564838C01
0.167,0.104 0.479,0.302 0.313,0.198 10 false *a
*a Component without harness connected
(Rear Seat Inner Belt Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 5 Rear No. 1 seat center belt unfastened Below 1 Ω
Rear No. 1 seat center belt fastened 10 kΩ or higher


If the result is not as specified, replace the rear seat inner belt assembly.


Hide 73380A 2.INSPECT REAR SEAT INNER BELT ASSEMBLY (w/ Occupant Detection Sensor)

a.
B601258C01
1.531,0.208 1.896,0.417 0.365,0.208 1.521,2.49 1.885,2.698 0.365,0.208 0.052,0.083 0.365,0.281 0.313,0.198 10 false *a 1.667,0.229 1.979,0.427 0.313,0.198 10 false f3 1.646,2.521 1.958,2.719 0.313,0.198 10 false C
*a Component without harness connected
(Rear Seat Inner Belt Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
f3-2 - C-1 Rear No. 1 seat center belt unfastened Below 1 Ω
Rear No. 1 seat center belt fastened 10 kΩ or higher
f3-5 - C-2 Always Below 1 Ω


If the result is not as specified, replace the rear seat inner belt assembly.