Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY › from 2020.11
RM37A0E _58 Vehicle Interior _086894 SEAT _0417795 REAR NO. 2 SEAT ASSEMBLY A

SEAT  REAR NO. 2 SEAT ASSEMBLY  REASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame may injure your hands.


PROCEDURE

Hide 79021A 1.INSTALL NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY

HINT:

When installing a No. 2 seat cushion cover sub-assembly, refer to Precaution in order to prevent wrinkles from forming.


a.

Engage the 14 claws.

B571159

NOTICE:

Be careful not to damage the No. 2 seat cushion cover sub-assembly.



b.

Engage the 19 hooks to install the No. 2 seat cushion cover sub-assembly.

B564575

NOTICE:

Be careful not to damage the No. 2 seat cushion cover sub-assembly.



c.

w/ Occupant Detection Sensor:

i.
B601276

Engage the 2 clamps.



Hide 72308 2.INSTALL RECLINING CONTROL LINK SUB-ASSEMBLY LH (for LH Side)

a.
B566742

Install the reclining control link sub-assembly LH with the 2 nuts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


Hide 71983 3.INSTALL REAR SEAT HEADREST GUIDE (for LH Side)

a.
B564550

Engage the 2 claws and guide to install the rear seat headrest guide.


Hide 71940E 4.INSTALL NO. 2 SEAT HEADREST ASSEMBLY (for LH Side)

a.
B564549

Install the No. 2 seat headrest assembly with the 3 nuts.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


Hide 72660L 5.INSTALL REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY LH (for LH Side)

a.

Route the rear No. 2 seat cushion lock cable assembly LH as shown in the illustration and engage the clamp.

B564548


b.

Engage the 4 clamps to install the rear No. 2 seat cushion lock cable assembly LH.

B564547


Hide 72660J 6.INSTALL REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY (for LH Side)

a.

Route the rear No. 2 seat cushion lock cable assembly as shown in the illustration.

B564546


b.

Engage the 4 clamps to install the rear No. 2 seat cushion lock cable assembly.

B564545


Hide 71844C 7.INSTALL REAR NO. 2 SEAT RECLINING COVER LH (for LH Side)

a.
B564544C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claw, clip and guide as shown in the illustration to install the rear No. 2 seat reclining cover LH.


Hide 71844A 8.INSTALL REAR NO. 2 SEAT RECLINING COVER LH (for LH Side)

a.
B564542C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claw and guide as shown in the illustration to install the rear No. 2 seat reclining cover LH.


Hide 71844K 9.INSTALL REAR NO. 2 SEAT NO. 2 RECLINING COVER LH (for LH Side)

a.
B564540C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claw and guide as shown in the illustration to install the rear No. 2 seat No. 2 reclining cover LH.


Hide 72598D 10.INSTALL NO. 2 RECLINING REMOTE CONTROL BEZEL LH (for LH Side)

a.
B566924C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 9 claws as shown in the illustration to install the No. 2 reclining remote control bezel LH.


b.
B564537C02
0,0 0,0 false
V113147

Insert in this Direction


Insert the rear No. 2 seat cushion lock cable assembly LH as shown in the illustration.


Hide 71704 11.INSTALL REAR SIDE SEAT BAND SUB-ASSEMBLY (for LH Side)

a.
B564535

Install the rear side seat band sub-assembly.


Hide 79024 12.INSTALL NO. 2 SEATBACK COVER SUB-ASSEMBLY LH (for LH Side)

HINT:

When installing a No. 2 seatback cover sub-assembly LH, refer to precaution in order to prevent wrinkles from forming.


a.
B564534

Engage the 10 claws to install the No. 2 seatback cover sub-assembly LH to the No. 2 seatback pad LH.

NOTICE:

Be careful not to damage the No. 2 seatback cover sub-assembly LH.



Hide 13.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD LH (for LH Side)

a.
B564532

Engage the 8 clips.


b.
B564531

Engage the 6 hooks.


c.
B564530C01
0,0 0,0 false
V100155

Fastener


Engage the 4 fasteners and 4 hooks to install the separate type rear seatback cover with pad LH.


Hide 79207C 14.INSTALL NO. 2 SEATBACK BOARD SUB-ASSEMBLY LH (for LH Side)

a.
B564529C01
0,0 0,0 false
V113147

Install in this Direction


Engage the guide as shown in the illustration.


b.
B564527

Engage the 6 clips and 2 claws as shown in the illustration to install the No. 2 seatback board sub-assembly LH.


Hide 72057B 15.INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY (for LH Side)

a.
B564525

Connect the rear No. 2 seat cushion lock cable assembly LH.


b.
B564524C01
0,0 0,0 false
V113147

Install in this Direction


Engage the guide as shown in the illustration.


c.
B564522

Install the rear seat lock control lever sub-assembly with the 2 screws.


Hide 72616A 16.INSTALL REAR SEATBACK LOCK STRIKER COVER LH (for LH Side)

a.
B564521C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides and 4 claws as shown in the illustration to install the rear seatback lock striker cover LH


Hide 79273A 17.INSTALL NO. 2 SEAT NO. 2 HINGE COVER (for LH Side)

a.
B564519C03
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Engage the 5 claws and 4 guides as shown in the illustration to install the No. 2 seat No. 2 hinge cover.


Hide 79273 18.INSTALL NO. 2 SEAT HINGE COVER (for LH Side)

a.
B564517C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Engage the 5 claws and 4 guides as shown in the illustration to install the No. 2 seat hinge cover.


Hide 71848K 19.INSTALL SEAT ADJUSTER COVER CAP (for LH Side)

a.
B564515

Install the 2 seat adjuster cover caps.


Hide 72307 20.INSTALL RECLINING CONTROL LINK SUB-ASSEMBLY RH (for RH Side)

a.
B566741

Install the reclining control link sub-assembly RH with the 2 nuts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


Hide 71983 21.INSTALL REAR SEAT HEADREST GUIDE (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 71940E 22.INSTALL NO. 2 SEAT HEADREST ASSEMBLY (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 72660K 23.INSTALL REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY RH (for RH Side)

a.

Route the rear No. 2 seat cushion lock cable assembly RH as shown in the illustration and engage the clamp.

B571157


b.

Engage the 4 clamps to install the rear No. 2 seat cushion lock cable assembly RH.

B571155


Hide 72660J 24.INSTALL REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY (for RH Side)

a.

Route the rear No. 2 seat cushion lock cable assembly as shown in the illustration.

B571156


b.

Engage the 4 clamps to install the rear No. 2 seat cushion lock cable assembly.

B571154


Hide 71843D 25.INSTALL REAR NO. 2 SEAT RECLINING COVER RH (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 71843A 26.INSTALL REAR NO. 2 SEAT RECLINING COVER RH (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 71843K 27.INSTALL REAR NO. 2 SEAT NO. 2 RECLINING COVER RH (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 72597E 28.INSTALL NO. 2 RECLINING REMOTE CONTROL BEZEL RH (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 71697M 29.INSTALL REAR SEATBACK PROTECTOR (for RH Side)

a.
B571153

Engage the guide.


b.

Install the rear seatback protector with the screw.


Hide 71704 30.INSTALL REAR SIDE SEAT BAND SUB-ASSEMBLY (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 79023 31.INSTALL NO. 2 SEATBACK COVER SUB-ASSEMBLY RH (for RH Side)

HINT:

When installing a No. 2 seatback cover sub-assembly RH, refer to precaution in order to prevent wrinkles from forming.


a.
B571152

Engage the 10 claws to install the No. 2 seatback cover sub-assembly RH to the No. 2 seatback pad RH.

NOTICE:

Be careful not to damage the No. 2 seatback cover sub-assembly RH.



Hide 32.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD RH (for RH Side)

a.
B571150

Engage the 8 clips.


b.
B571149

Engage the 8 hooks.


c.
B571148C02
0,0 0,0 false
V100155

Fastener


Engage the 4 fasteners and 4 hooks to install the separate type rear seat cushion cover with pad RH.


Hide 79207B 33.INSTALL NO. 2 SEATBACK BOARD SUB-ASSEMBLY RH (for RH Side)

a.
B571146C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides as shown in the illustration.


b.
B571147

Engage the 8 clips and 2 claws as shown in the illustration to install the No. 2 seatback board sub-assembly RH.


Hide 72057B 34.INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 72615A 35.INSTALL REAR SEATBACK LOCK STRIKER COVER RH (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 79273A 36.INSTALL NO. 2 SEAT NO. 2 HINGE COVER (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 79273 37.INSTALL NO. 2 SEAT HINGE COVER (for RH Side)

HINT:

Use the same procedure as for the LH side.


Hide 71848K 38.INSTALL SEAT ADJUSTER COVER CAP (for RH Side)

HINT:

Use the same procedure as for the LH side.