Wear protective gloves. Sharp areas on the seat frame may injure your hands.
1.REMOVE REAR NO. 1 SEAT ASSEMBLY RH
72525J
2.REMOVE RECLINING ADJUSTER RELEASE HANDLE RH
72927
3.REMOVE REAR SEAT CUSHION UNDER COVER RH
71848C
4.REMOVE SEAT ADJUSTER COVER CAP RH
72057E
5.REMOVE REAR SEAT NO. 1 LOCK CONTROL LEVER SUB-ASSEMBLY RH
72057F
6.REMOVE REAR SEAT NO. 2 LOCK CONTROL LEVER SUB-ASSEMBLY RH
71825B
7.REMOVE REAR SEAT CUSHION MOULDING RH
8.REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD
71611A
9.REMOVE OCCUPANT DETECTION SENSOR (REAR SEAT CUSHION PAD RH)
|
Fastener |
Disengage the 7 fasteners.
Using a screwdriver, disengage the 14 claws as shown in the illustration and remove the occupant detection sensor (rear seat cushion pad RH) from the separate type rear seat cushion cover.
| *a | Screwdriver | - | - |