Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR (for Rear No. 1 Seat RH Side) › from 2020.11
RM37A0E _58 Vehicle Interior _086895 SEAT BELT _0453895 OCCUPANT DETECTION SENSOR(for Rear No. 1 Seat RH Side) G

SEAT BELT  OCCUPANT DETECTION SENSOR(for Rear No. 1 Seat RH Side)  INSPECTION  


PROCEDURE

Hide 71611A 1.INSPECT OCCUPANT DETECTION SENSOR (REAR SEAT CUSHION PAD RH) (for RH)

a.
B357844C01
0.146,0.115 0.49,0.448 0.344,0.333 10 false *a
*a Component without harness connected
(Occupant Detection Sensor (Rear Seat Cushion Pad RH))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Rear seat occupied Below 100 Ω
1 - 2 Rear seat not occupied 1 MΩ or higher


If the result is not as specified, replace the occupant detection sensor (rear seat cushion pad RH).


Hide 71611A 2.INSPECT OCCUPANT DETECTION SENSOR (REAR SEAT CUSHION PAD RH) (for Center)

a.
B602773C01
0.146,0.115 0.49,0.448 0.344,0.333 10 false *a
*a Component without harness connected
(Occupant Detection Sensor (Rear Seat Cushion Pad RH))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Rear seat occupied Below 100 Ω
1 - 2 Rear seat not occupied 1 MΩ or higher


If the result is not as specified, replace the occupant detection sensor (rear seat cushion pad RH).