Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR (for Rear No. 2 Seat) › from 2020.11
RM37A0E _58 Vehicle Interior _086895 SEAT BELT _0453910 OCCUPANT DETECTION SENSOR(for Rear No. 2 Seat) G

SEAT BELT  OCCUPANT DETECTION SENSOR(for Rear No. 2 Seat)  INSPECTION  


PROCEDURE

Hide 71503A 1.INSPECT OCCUPANT DETECTION SENSOR (REAR SEAT CUSHION PAD SUB-ASSEMBLY)

a.
B602773C01
0.146,0.115 0.49,0.448 0.344,0.333 10 false *a
*a Component without harness connected
(Occupant Detection Sensor (Rear Seat Cushion Pad Sub-assembly))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Rear seat occupied Below 100 Ω
1 - 2 Rear seat not occupied 1 MΩ or higher


If the result is not as specified, replace the occupant detection sensor (rear seat cushion pad sub-assembly).