Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER MOTOR › from 2020.11
RM37A0E _59 Vehicle Exterior _086901 WIPER / WASHER _0417558 FRONT WIPER MOTOR G

WIPER / WASHER  FRONT WIPER MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85110 1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)

a.
E431026C01
1.302,2.823 1.656,3.104 true 0.76,2.615 0.917,2.802 0.156,0.188 10 false A 0.74,2.771 0.917,2.99 0.177,0.219 10 false A 1.698,3.021 1.938,3.229 0.24,0.208 10 true *a
*a Alignment Mark


for LH Side:

i.

Operate the windshield wiper motor assembly.


ii.

Stop the windshield wiper motor assembly operation.


iii.

Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


Standard Clearance:
Area Measurement
A 10 mm (0.394 in.)


OK:

The front wiper stops at the position shown in the illustration.




b.
E431027C01
1.604,2.792 1.99,2.594 true 0.792,2.458 0.938,2.646 0.146,0.188 10 false A 0.771,2.615 0.917,2.813 0.146,0.198 10 false A 2.031,2.479 2.281,2.677 0.25,0.198 10 true *a
*a Alignment Mark


for RH Side:

i.

Operate the windshield wiper motor assembly.


ii.

Stop the windshield wiper motor assembly operation.


iii.

Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


Standard Clearance:
Area Measurement
A 10 mm (0.394 in.)


OK:

The front wiper stops at the position shown in the illustration.




Hide 85110 2.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)

a.
B602600C01
2.125,2.792 2,2.594 true 2.531,2.625 2.677,2.813 0.146,0.188 10 false A 2.563,2.781 2.708,2.979 0.146,0.198 10 false A 1.823,2.5 2.073,2.698 0.25,0.198 10 false *a
*a Alignment Mark


for RH Side:

i.

Operate the windshield wiper motor assembly.


ii.

Stop the windshield wiper motor assembly operation.


iii.

Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


Standard Clearance:
Area Measurement
A 10 mm (0.394 in.)


OK:

The front wiper stops at the position shown in the illustration.




b.
B602601C01
1.833,2.792 1.688,3.031 true 2.552,2.615 2.708,2.802 0.156,0.188 10 false A 2.521,2.458 2.698,2.677 0.177,0.219 10 false A 1.552,3.021 1.792,3.229 0.24,0.208 10 false *a
*a Alignment Mark


for LH Side:

i.

Operate the windshield wiper motor assembly.


ii.

Stop the windshield wiper motor assembly operation.


iii.

Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


Standard Clearance:
Area Measurement
A 10 mm (0.394 in.)


OK:

The front wiper stops at the position shown in the illustration.