Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER MOTOR › from 2020.11
RM37A0E _59 Vehicle Exterior _086901 WIPER / WASHER _0417558 FRONT WIPER MOTOR G

WIPER / WASHER  FRONT WIPER MOTOR  INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Ensure that fingers or articles of clothing do not get caught in moving parts when performing this test.


PROCEDURE

Hide 85110 1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)

a.
E239382C23
1.521,1.427 1.208,1.781 true 1.917,1.427 2.24,1.781 true 0.865,0.771 1.354,1.063 true 0.625,0.688 0.865,0.865 0.24,0.177 10 false +2 2.219,1.813 2.51,2.052 0.292,0.24 10 false E 1.083,1.813 1.365,1.99 0.281,0.177 10 false +1 0.104,0.063 0.385,0.24 0.281,0.177 10 false *a
*a Component without harness connected
(Windshield Wiper Motor Assembly)


Apply battery voltage to the windshield wiper motor assembly and check the LO operation.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 5 (+1)
Auxiliary battery negative (-) → Terminal 4 (E)
Motor operates at low speed (LO)



b.

Apply battery voltage to the windshield wiper motor assembly and check the HI operation.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 3 (+2)
Auxiliary battery negative (-) → Terminal 4 (E)
Motor operates at high speed (HI)


If the result is not as specified, replace the windshield wiper motor assembly.


Hide 85110 2.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)

a.
E239382C27
1.521,1.427 1.208,1.781 true 1.917,1.427 2.24,1.781 true 2.396,0.688 2.094,1.052 true 2.208,1.823 2.448,2 0.24,0.177 10 false +2 1.125,1.823 1.417,2.063 0.292,0.24 10 false E 2.458,0.594 2.74,0.771 0.281,0.177 10 false +1 0.104,0.063 0.385,0.24 0.281,0.177 10 false *a
*a Component without harness connected
(Windshield Wiper Motor Assembly)


Apply battery voltage to the windshield wiper motor assembly and check the LO operation.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 1 (+1)
Auxiliary battery negative (-) → Terminal 5 (E)
Motor operates at low speed (LO)



b.

Apply battery voltage to the windshield wiper motor assembly and check the HI operation.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 4 (+2)
Auxiliary battery negative (-) → Terminal 5 (E)
Motor operates at high speed (HI)


If the result is not as specified, replace the windshield wiper motor assembly.