Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PARKING ASSIST MONITOR SYSTEM › from 2020.11
RM37A0E _56 Audio / Visual / Telematics _086880 PARK ASSIST / MONITORING _0420014 PARKING ASSIST MONITOR SYSTEM D

PARK ASSIST / MONITORING  PARKING ASSIST MONITOR SYSTEM  INITIALIZATION  


INITIALIZE PARKING ASSIST MONITOR SYSTEM


a.

When the "!" mark is displayed on the radio and display receiver assembly or multi-display assembly, correct the steering angle neutral point using the following method.

i.

Fully turn the steering wheel to the right and left on level ground.

NOTICE:

Memorizing the steering angle neutral point must be carried out with the engine running or hybrid system operating. Apply the parking brake, depress the brake pedal, check that the shift lever is in P, and ensure that the vehicle is not moving.


HINT:

If the "!" mark is displayed on the image of the area behind the vehicle with the steering wheel fully turned to the right or left, perform "Steering Angle Setting in Calibration".

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM>CALIBRATION