Home › Vehicle Interior › MIRROR (INT) › DIGITAL REAR-VIEW MIRROR SYSTEM › from 2020.11
RM37A0E _58 Vehicle Interior _086890 MIRROR (INT) _0455056 DIGITAL REAR-VIEW MIRROR SYSTEM J

MIRROR (INT)  DIGITAL REAR-VIEW MIRROR SYSTEM  The Camera Malfunction Indicator Displays and the Screen is Darkened  


DESCRIPTION

The image signals sent from the inner mirror camera assembly are input to the inner rear view mirror assembly via the vehicle wire harness and then displayed on the screen.

WIRING DIAGRAM

B596329E01
0.333,2.896 0.792,3.094 0.458,0.198 10 false R1 0.333,3.073 2.458,3.302 2.125,0.229 10 false Inner Rear View Mirror Assembly 0.104,3.427 1.792,3.625 1.688,0.198 10 false *: Shielded 4.833,2.917 5.292,3.115 0.458,0.198 10 false W25 4.833,3.063 6.75,3.271 1.917,0.208 10 false Inner Mirror Camera Assembly 1.365,0.688 1.823,0.885 0.458,0.198 10 false CEB+ 1.417,1.125 2.031,1.323 0.615,0.198 10 false CEG 1.385,1.563 1.844,1.76 0.458,0.198 10 false CEV- 1.354,2.021 1.813,2.219 0.458,0.198 10 false CEV+ 1.333,2.448 1.844,2.75 0.51,0.302 10 false SGND 1.865,0.573 2.021,0.771 0.156,0.198 10 false 2 1.854,1.031 2.01,1.229 0.156,0.198 10 false 1 1.865,1.917 2.021,2.115 0.156,0.198 10 false 4 1.865,1.469 2.021,1.667 0.156,0.198 10 false 3 1.865,2.323 2.021,2.521 0.156,0.198 10 false 5 5.198,0.573 5.354,0.771 0.156,0.198 10 false 1 5.198,1.031 5.354,1.229 0.156,0.198 10 false 3 5.198,1.469 5.354,1.667 0.156,0.198 10 false 2 5.208,1.906 5.365,2.104 0.156,0.198 10 false 4 5.208,2.323 5.365,2.521 0.156,0.198 10 false 5 5.448,0.677 6.063,0.875 0.615,0.198 10 false CEB+ 5.448,1.135 5.906,1.333 0.458,0.198 10 false CEG 5.448,1.573 6.063,1.771 0.615,0.198 10 false CEV- 5.448,2.021 6.063,2.219 0.615,0.198 10 false CEV+ 5.458,2.427 6.073,2.625 0.615,0.198 10 false SGND 2.552,2.552 2.708,2.75 0.156,0.198 10 false * 4.563,2.552 4.719,2.75 0.156,0.198 10 false * 3.552,2.552 3.708,2.75 0.156,0.198 10 false *

PROCEDURE

1.CHECK HARNESS AND CONNECTOR (INNER REAR VIEW MIRROR ASSEMBLY - INNER MIRROR CAMERA ASSEMBLY)
a.

Disconnect the R1 inner rear view mirror assembly connector.


b.

Disconnect the W25 inner mirror camera assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
R1-1 (CEG) - W25-3 (CEG) Always Below 1 Ω
R1-2 (CEB+) - W25-1 (CEB+) Always Below 1 Ω
R1-4 (CEV+) - W25-4 (CEV+) Always Below 1 Ω
R1-3 (CEV-) - W25-2 (CEV-) Always Below 1 Ω
R1-5 (SGND) - W25-5 (SGND) Always Below 1 Ω
R1-1 (CEG) or W25-3 (CEG) - Body ground Always 10 kΩ or higher
R1-2 (CEB+) or W25-1 (CEB+) - Body ground Always 10 kΩ or higher
R1-4 (CEV+) or W25-4 (CEV+) - Body ground Always 10 kΩ or higher
R1-3 (CEV-) or W25-2 (CEV-) - Body ground Always 10 kΩ or higher
R1-5 (SGND) - W25-5 (SGND) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

2.CHECK INNER REAR VIEW MIRROR ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

2.CHECK INNER REAR VIEW MIRROR ASSEMBLY
a.
E431302C02
1.542,0.156 1.948,0.406 0.406,0.25 1.573,1.219 1.083,0.833 1.083,0.833 0.771,0.833 true 1.563,1.469 1.083,1.781 1.083,1.781 0.802,1.781 true 1.604,0.188 1.938,0.406 0.333,0.219 10 false W25 0.333,0.729 0.792,0.948 0.458,0.219 10 false CEB+ 0.406,1.688 0.865,1.906 0.458,0.219 10 false CEG 0.094,0.052 0.396,0.323 0.302,0.271 10 false *a
*a Front view of wire harness connector
(to Inner Mirror Camera Assembly)


Disconnect the inner mirror camera assembly connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
W25-1 (CEB+) - W25-3 (CEG) Ignition switch ON 5.5 V or higher



Result:
Proceed to
OK
NG



OK

3.CHECK INNER MIRROR CAMERA ASSEMBLY

NG

REPLACE INNER REAR VIEW MIRROR ASSEMBLY

3.CHECK INNER MIRROR CAMERA ASSEMBLY
a.

Temporarily replace the inner mirror camera assembly with a new or known good one.

Click hereVehicle Interior>MIRROR (INT)>INNER MIRROR MONITOR CAMERA>REMOVAL


b.

Check that the digital rear-view mirror system is operating normally.

OK:

The digital rear-view mirror system is operating normally.



Result:
Proceed to
OK
NG



OK

END (INNER MIRROR CAMERA ASSEMBLY IS DEFECTIVE)

NG

REPLACE INNER REAR VIEW MIRROR ASSEMBLY