DATA LIST
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| ACC SW | Ignition switch | OFF or ON | OFF: Ignition switch off
ON: Ignition switch ACC |
- |
| IG SW | Ignition switch | OFF or ON | OFF: Ignition switch off or ACC
ON: Ignition switch ON |
- |
| RR Door Courtesy SW | Rear door courtesy light switch assembly (for RH) | OFF or ON | OFF: Rear door RH closed
ON: Rear door RH open |
- |
| RL Door Courtesy SW | Rear door courtesy light switch assembly (for LH) | OFF or ON | OFF: Rear door LH closed
ON: Rear door LH open |
- |
| Back Door Courtesy SW | Back door courtesy light switch | OFF or ON | OFF: Back door closed
ON: Back door open |
- |
| FR Door Lock Pos | Front door RH unlock detection switch | LOCK or UNLOCK | LOCK: Front door RH locked
UNLOCK: Front door RH unlocked |
- |
| FR Door Courtesy SW | Front door courtesy light switch assembly (for RH) | OFF or ON | OFF: Front door RH closed
ON: Front door RH open |
- |
| FL Door Lock Pos | Front door LH unlock detection switch | LOCK or UNLOCK | LOCK: Front door LH locked
UNLOCK: Front door LH unlocked |
- |
| FL Door Courtesy SW | Front door courtesy light switch assembly (for LH) | OFF or ON | OFF: Front door LH closed
ON: Front door LH open |
- |
| Hood Courtesy SW | Engine hood courtesy switch | OFF or ON | OFF: Engine hood closed
ON: Engine hood open |
- |
| RR-Door Lock Pos SW | Rear door RH unlock detection switch | OFF or ON | OFF: Rear door RH locked
ON: Rear door RH unlocked |
- |
| RL-Door Lock Pos SW | Rear door LH unlock detection switch | OFF or ON | OFF: Rear door LH locked
ON: Rear door LH unlocked |
- |
| Panic Function | Setting of the customized item "Panic Function"*1 | ON or OFF | Customize setting displayed | - |
| Warning by Horn | Setting of customize setting "Warning by Horn"*2 | ON or OFF | Customize setting displayed | - |
| Security control with mechanism key | Setting of customize setting "Security control with mechanism key"*3 | OFF or ON | Customize setting displayed | - |
*1: w/ Panic Switch
*2: Vehicles not displaying the item "Security control with mechanism key" on the GTS
*3: Vehicles displaying the item "Security control with mechanism key" on the GTS
ACTIVE TEST
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body or Entry&Start / Active Test.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Vehicle Horn | Vehicle horn | OFF/ON | - |
| Security Horn | Security horn assembly | OFF/ON | - |
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Immobiliser Indicator | Security indicator | OFF/ON | - |