Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM › from 2020.11
RM37A0E _58 Vehicle Interior _086895 SEAT BELT _0420373 SEAT BELT WARNING SYSTEM D

SEAT BELT  SEAT BELT WARNING SYSTEM  SYSTEM DESCRIPTION  


SEAT BELT WARNING SYSTEM DESCRIPTION


a.

w/ Buzzer Regulated by Law:

i.

Seat belt warning light operation for driver seat belt:

The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the driver seat belt state, vehicle speed, shift lever position and parking brake state.


ii.

Seat belt warning light operation for front passenger seat belt:

The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with whether the front passenger seat is occupied, the front passenger seat belt state, vehicle speed, shift lever position and parking brake state.


iii.

Seat belt warning buzzer operation for front seat belt:

After turning the ignition switch to ON, if the driver seat belt is not fastened within 1.8 seconds, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 6 seconds. (Buzzer Regulated by Law)

When the vehicle is driven at approximately 20 km/h (12 mph) or more with the front passenger seat occupied and the driver or front passenger seat belt not fastened, the seat belt warning buzzer in the combination meter assembly will sound once.

When 24 seconds have passed after the buzzer sounded, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 6 seconds.

After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 90 seconds.



b.

w/o Buzzer Regulated by Law:

i.

Seat belt warning light operation for driver seat belt:

The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the driver seat belt state, vehicle speed, shift lever position and parking brake state.


ii.

Seat belt warning light operation for front passenger seat belt:

The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with whether the front passenger seat is occupied, the front passenger seat belt state, vehicle speed, shift lever position and parking brake state.


iii.

Rear seat belt warning light operation (w/o Rear Seat Occupant Detection Sensor):

The rear seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the rear door state, rear seat belt state, vehicle speed, shift lever position and parking brake state.


iv.

Rear seat belt warning light operation (w/ Rear Seat Occupant Detection Sensor):

The rear seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the vehicle speed, shift lever position, parking brake state, rear seat belt state and rear seat occupant state.


v.

Seat belt warning buzzer operation for front seat belt:

When the vehicle is driven at approximately 20 km/h (12 mph) or more with the front passenger seat occupied and the driver or front passenger seat belt not fastened, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 24 seconds.

After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 100 seconds.


vi.

Seat belt warning buzzer operation for rear seat belt (w/o Rear Seat Occupant Detection Sensor):

When the vehicle is driven at approximately 20 km/h (12 mph) or more with a rear seat belt not fastened, the seat belt warning buzzer in the combination meter assembly will sound once.

After the seat belt warning buzzer in the combination meter assembly sounded once, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 6 seconds.

After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 60 seconds.


vii.

Seat belt warning buzzer operation for rear seat belt (w/ Rear Seat Occupant Detection Sensor):

When the vehicle is driven at approximately 20 km/h (12 mph) or more with a rear seat occupied and the rear seat belt not fastened, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 24 seconds.

After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 100 seconds.




FUNCTION OF MAIN COMPONENTS


Component Function
Front seat inner belt assembly (driver seat) Informs the airbag sensor assembly of the driver seat belt condition (fastened or unfastened).
Front seat inner belt assembly (front passenger seat) Informs the airbag sensor assembly of the front passenger seat belt condition (fastened or unfastened).
Occupant detection sensor (separate type front seat cushion pad (front passenger seat)) Informs the combination meter assembly of the front passenger seat condition (occupied or unoccupied).
Combination meter assembly
·

Illuminates, blinks or turns off the seat belt warning light.

·

Illuminates or turns off the rear seat belt warning light.*1

·

Sounds the seat belt warning buzzer.


·

Rear seat inner belt assembly LH*1

·

Rear seat inner belt assembly (center)*1

·

Rear seat inner belt assembly RH*1

·

Rear No. 2 seat inner belt assembly LH*1

·

Rear No. 2 seat inner belt assembly RH*1


Informs the combination meter assembly of each rear seat belt condition (fastened or unfastened).
Rear door courtesy light switch assembly (LH/RH)*2 Informs the main body ECU (multiplex network body ECU) of the rear door condition (open or closed).
Main body ECU (multiplex network body ECU) Sends the driver seat belt buckle switch, parking brake signal and rear door courtesy light switch signal*2 to the combination meter assembly via CAN communication.
No. 2 skid control ECU (brake actuator assembly)*3 Sends the vehicle speed signal to the combination meter assembly via CAN communication.
Skid control ECU (brake actuator assembly)*4
Hybrid vehicle control ECU*3 Sends the shift position signal to the combination meter assembly via CAN communication.
ECM*4

*1: w/ Rear Seat Belt Warning

*2: w/ Rear Seat Belt Warning without Rear Seat Occupant Detection Sensor

*3: for HV Model

*4: for Gasoline Model