Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › GRILLE SHUTTER SYSTEM › 2020.11–2021.10
RM37A0E _59 Vehicle Exterior _086903 EXTERIOR PANELS / TRIM _0457335 GRILLE SHUTTER SYSTEM U

EXTERIOR PANELS / TRIM  GRILLE SHUTTER SYSTEM  TERMINALS OF ECU  


CHECK SWING GRILLE ACTUATOR ASSEMBLY


B438341E07
3.396,0.115 3.813,0.365 0.417,0.25 3.469,0.167 3.927,0.365 0.458,0.198 10 false A52

a.

Disconnect the A52 swing grille actuator assembly connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Tester Connection Terminal Description Condition Specified Condition
A52-1 (+B) - Body ground Auxiliary battery power supply Ignition switch off 11 to 14 V
A52-3 (GND) - Body ground Ground Always Below 1 Ω