THERMOSTAT > REMOVAL |
| 1. REMOVE NO. 1 ENGINE UNDER COVER (for 4WD) |
![]() |
Remove the 8 bolts and under cover.
| 2. DRAIN ENGINE COOLANT |
![]() |
Remove the reservoir cap and, using a wrench, remove the vent plug.
Loosen the cylinder block drain cock plug and the radiator drain cock plug and then drain the coolant.

| 3. DISCONNECT RADIATOR HOSE INLET |
| 4. REMOVE WATER OUTLET |
![]() |
Remove the 3 bolts, water outlet and gasket.
| 5. REMOVE THERMOSTAT |
Remove the thermostat with gasket.