STARTER (for 1.7 kW Type) > INSTALLATION |
| 1. INSTALL STARTER ASSEMBLY |
![]() |
Install the starter with the 2 bolts.
Install the starter wire to terminal 30 with the nut.
Attach the terminal cap.
Connect the starter connector.
| 2. CONNECT CLUTCH RELEASE CYLINDER ASSEMBLY |
![]() |
Install the clutch release cylinder with the 2 bolts.
| 3. INSTALL FRONT FENDER SEAL |
Install the fender seal with the 5 clips.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |