DTC P0560/96 System Voltage |
| DTC No. | DTC Detection Condition | Trouble Area |
| P0560/96 | Open in the TCM back-up power source circuit (1 trip detection logic). |
|

| 1.CHECK TCM (BATTERY, GROUND) |
![]() |
Disconnect the T17 and T19 TCM connectors.
Measure the voltage of the wire harness side connectors.
| Tester Connection | Condition | Specified Condition |
| T17-5 (BATT) - T19-1 (E1) | Always | 11 to 14 V |
Measure the resistance of the wire harness side connector.
| Tester Connection | Condition | Specified Condition |
| T19-1 (E1) - Body ground | Always | Below 1 Ω |
|
| ||||
| OK | ||
| ||