Home › BODY › SEAT › FRONT SEAT ASSEMBLY (w/ Front Seat Side Airbag)

FRONT SEAT ASSEMBLY (w/ Front Seat Side Airbag) > DISASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.



1. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH


    B087768E01
  1. Raise the reclining adjuster release handle to reveal the claw. Using a screwdriver, detach the claw and remove the release handle.

    HINT:
    Tape the screwdriver tip before use.



2. REMOVE FRONT SEAT CUSHION SHIELD LH


    B211021E01
  1. Remove the 2 screws.

  1. Detach the rear part of the cushion shield in the order indicated in the illustration, and then detach the claw and remove the cushion shield.



3. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH


B087811E01
  1. w/ Driver seat belt warning light:
    Detach the clamp.



    B089297E01
  1. w/ Driver seat belt warning light:
    Detach the wire harness from the clamp.

  1. Remove the nut and seat belt.

  1. Remove the buckle cover.



4. REMOVE FRONT SEAT CUSHION COVER LH
  1. Remove the seat cushion cover.



5. REMOVE FRONT SEAT CUSHION INNER SHIELD LH


    B086035E01
  1. Remove the 2 screws. Then remove the inner shield in the order indicated in the illustration.



6. REMOVE SEATBACK SPRING
  1. Remove the seatback spring.



7. REMOVE SEAT CUSHION COVER WITH PAD
  1. Detach the wire harness clamps.



    B190019E02
  1. Detach the 2 hooks.

  1. Detach the hooks in the hook area shown in the illustration.

  1. Remove the hog rings and seat cushion cover with pad from the seat cushion frame.



8. REMOVE FRONT SEAT CUSHION PROTECTOR


    B207791
  1. Remove the 2 protectors.



9. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    B084955E02
  1. Remove the hog rings and seat cushion cover.



10. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH (w/ Seat Heater System)


    B122838E02
  1. Cut off the tack pins which fasten the seat heater, and then remove the front seat cushion heater from the seat cushion cover.

    NOTICE:
    Be careful not to damage the seat cushion cover.



11. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    B207788
  1. Remove the hog rings from the wires of the seatback cover. Then roll up the seatback cover.



    B209094
  1. Remove the hog rings and detach the strap of the seatback cover. Then roll up the seatback cover.



    B207088
  1. Remove the hog rings from the center of the seatback pad and roll up the seatback cover.



    B131236
  1. Remove the nut and detach the seatback cover bracket.



    B207581
  1. Remove the hog rings from the upper part of the seatback pad. Then roll up the seatback cover.



    B207089
  1. Detach the 4 claws and remove the 2 headrest supports.



    B207625
  1. Remove the hog rings and seatback cover.



12. REMOVE SEPARATE TYPE FRONT SEATBACK PAD


    B207090
  1. Remove the seatback pad.



13. REMOVE FRONT SEAT BACK HEATER ASSEMBLY LH (w/ Seat Heater System)


    B122836E02
  1. Cut off the tack pins which fasten the seat heater, and then remove the front seatback heater from the seatback cover.

    NOTICE:
    Be careful not to damage the seat cushion cover.



14. REMOVE FRONT SEAT CUSHION FRAME SUB-ASSEMBLY


    B213584
  1. w/ Seat Heater system:
    Detach the wire harness clamps.



    B213444
  1. Detach the wire harness clamps.

  1. Remove the 4 bolts and seat cushion frame.



15. REMOVE SEAT TRACK HANDLE SUB-ASSEMBLY


    B084969E02
  1. Detach the spring of the seat track in the order indicated in the illustration. Then remove the handle.



16. REMOVE RECLINING ADJUSTER LOWER ARM SUB-ASSEMBLY LH


    B214331
  1. Remove the 2 bolts and reclining adjuster lower arm with front seat outer track assembly.



    B214332
  1. Remove the 3 bolts and reclining adjuster lower arm.



17. REMOVE RECLINING ADJUSTER LOWER ARM SUB-ASSEMBLY RH

HINT:
Use the same procedures described for the LH side.



18. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH
  1. Remove the seat cushion edge protector.