FRONT SEAT ASSEMBLY (w/ Front Seat Side Airbag) > REASSEMBLY |
| 1. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH |
Install the seat cushion edge protector.
| 2. INSTALL RECLINING ADJUSTER LOWER ARM SUB-ASSEMBLY LH |
![]() |
Install the reclining adjuster lower arm with the 3 bolts.
![]() |
Install the reclining adjuster lower arm with front seat outer track assembly with the 2 bolts.
| 3. INSTALL RECLINING ADJUSTER LOWER ARM SUB-ASSEMBLY RH |
| 4. INSTALL SEAT TRACK HANDLE SUB-ASSEMBLY |
![]() |
Attach the spring of the seat track in the order indicated in the illustration to install the handle.
| 5. INSTALL FRONT SEAT CUSHION FRAME SUB-ASSEMBLY |
![]() |
Install the cushion frame with the 4 bolts.
Attach the wire harness cramps.
![]() |
w/ Seat Heater System:
Attach the wire harness clamps.
| 6. INSTALL FRONT SEAT BACK HEATER ASSEMBLY LH (w/ Seat Heater System) |
Set the seat heater to the seatback cover.
Using a tacker, install the front seat heater to the seatback cover with the 6 tack pins as shown in the illustration.

| 7. INSTALL SEPARATE TYPE FRONT SEATBACK PAD |
![]() |
Install the seatback pad.
| 8. INSTALL SEPARATE TYPE FRONT SEATBACK COVER |
![]() |
Using hog ring pliers, attach the strap of the seatback cover to the seatback pad with new hog rings.
![]() |
Attach the 4 claws to install the 2 headrest supports.
![]() |
Using hog ring pliers, install the upper part of the seatback cover to the seatback pad with new hog rings.
![]() |
Attach the front seatback cover bracket and install the nut.
![]() |
Using hog ring pliers, install the center of the seatback cover to the seatback pad with new hog rings.
![]() |
Using hog ring pliers, attach the strap of the seatback cover to the seatback spring with new hog rings.
![]() |
Using hog ring pliers, attach the wires at the bottom of the seatback cover with new hog rings.
| 9. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH (w/ Seat Heater System) |
![]() |
Set the front seat cushion heater to the seat cushion cover.
Using a tacker, install the front seat cushion heater to the seat cushion cover with the 12 tack pins as shown in the illustration. A
| 10. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER |
![]() |
Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.
| 11. INSTALL FRONT SEAT CUSHION PROTECTOR |
![]() |
Install the 2 protectors.
| 12. INSTALL SEAT CUSHION COVER WITH PAD |
![]() |
Install the seat cushion cover with pad to the seat cushion frame.
Using hog ring pliers, install the seat cushion cover with pad with new hog rings.
Attach the hooks in the hook area shown in the illustration.
Attach the 2 hooks.
| 13. INSTALL SEATBACK SPRING |
Install the seatback spring.
| 14. INSTALL FRONT SEAT CUSHION INNER SHIELD LH |
![]() |
Install the cushion shield in the order indicated in the illustration.
Install the 2 screws.
| 15. INSTALL FRONT SEAT CUSHION COVER LH |
Install the seat cushion cover.
| 16. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH |
![]() |
Install the buckle cover on the seat belt.
![]() |
Install the seat belt with the nut.
![]() |
w/ Driver seat belt warning light:
Install the clamp as shown in the illustration.
| 17. INSTALL FRONT SEAT CUSHION SHIELD LH |
![]() |
Attach the claw, and then attach the rear part of the cushion shield in the order indicated in the illustration to install the cushion shield.
Install the 2 screws.
| 18. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH |
![]() |
Attach the claw to install the release handle.