FRONT SEAT ASSEMBLY (for Bench Seat Type) > REASSEMBLY |
| 1. INSTALL FRONT SEAT CUSHION COVER (for TSAM Made) |
If installing a new front seat cushion pad:
![]() |
Using hog ring pliers, install the front seat cushion cover to a new seat cushion pad with new hog rings.
Set the seat cushion cover with pad in place.
![]() |
Using hog ring pliers, install the seat cushion cover with pad to the front seat cushion frame with new hog rings.
If installing the front seat cushion pad with front seat cushion frame:
![]() |
Using hog ring pliers, install the front seat cushion cover to the front seat cushion pad with new hog rings.
![]() |
Using hog ring pliers, install the seat cushion cover with pad to the front seat cushion frame with new hog rings.
w/ Occupant detection sensor:
Attach the wire harness clamp.
| 2. INSTALL FRONT SEAT CUSHION COVER (for TMT Made) |
If installing a new front seat cushion pad:
![]() |
Using hog ring pliers, install the front seat cushion cover to a new seat cushion pad with new hog rings.
Set the seat cushion cover with pad in place.
![]() |
Using hog ring pliers, install the seat cushion cover with pad to the front seat cushion frame with new hog rings.
Attach the hooks.
If installing the front seat cushion pad with front seat cushion frame:
![]() |
Using hog ring pliers, install the front seat cushion cover to the front seat cushion pad with new hog rings.
![]() |
Using hog ring pliers, install the front seat cushion cover to the front seat cushion frame with new hog rings.
Attach the hooks.
w/ Occupant detection sensor:
Attach the wire harness clamp.
| 3. INSTALL FRONT SEATBACK COVER |
![]() |
Using hog ring pliers, install the seatback cover to the seatback pad with 2 new hog rings.
| 4. INSTALL SEATBACK COVER WITH PAD |
![]() |
Set the seatback cover with pad in place and attach the 4 claws to install the 2 headrest supports.
![]() |
Using hog ring pliers, install new hog rings.
Attach the 2 pieces of fastening tape.
| 5. INSTALL FRONT SEATBACK ASSEMBLY |
![]() |
Install the seatback with the 4 bolts.
| 6. INSTALL FRONT SEAT CUSHION SHIELD INNER RH |
![]() |
Attach the 2 claws and install the cushion shield.
Install the screw.
| 7. INSTALL FRONT SEAT CUSHION SHIELD RH |
| 8. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH |
![]() |
Install the release handle with the screw.