Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Double Cab)

REAR SEAT ASSEMBLY (for Double Cab) > DISASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. REMOVE REAR SEAT HEADREST ASSEMBLY
  1. Remove the 2 headrests.



2. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY (w/ Center Headrest)
  1. Remove the headrest.



3. REMOVE NO. 3 SEAT LEG BRACKET FRONT LH
  1. Remove the nut, washer and bracket.



4. REMOVE NO. 3 SEAT LEG BRACKET FRONT RH

HINT:
Use the same procedures described for the LH side.



5. REMOVE REAR SEAT CUSHION COVER LH


B084941E01
  1. Remove the screw.

  1. Pull the cushion cover in the direction indicated by the arrow in the illustration to detach the claw. Then remove the cushion cover.



6. REMOVE REAR SEAT CUSHION COVER RH

HINT:
Use the same procedures described for the LH side.



7. REMOVE REAR SEAT CUSHION ASSEMBLY


    B084942E01
  1. Remove the 2 bolts and seat cushion.



8. REMOVE NO. 1 SEATBACK COVER

NOTICE:
As the seatback pad is affixed to the seatback frame, do not remove the pad from the frame unless it is necessary to replace the pad. If the pad is removed from the frame, make sure to replace the pad.



  1. If reusing the seatback pad:



      B084939E02
    1. Remove the hog rings.



    2. B084943E01
    3. w/o Center Headrest:
      Detach the 8 claws and remove the 4 headrest supports.



    4. B123886
    5. w/ Center Headrest:
      Detach the 12 claws and remove the 6 headrest supports.



    6. B084940E02
    7. Remove the hog rings and seatback cover from the seatback pad.



  1. If replacing the seatback pad:



      B084939E02
    1. Remove the hog rings.



    2. B084943E01
    3. w/o Center Headrest:
      Detach the 8 claws and remove the 4 headrest supports. Then remove the seatback cover with pad from the seatback frame.



    4. B123886
    5. w/ Center Headrest:
      Detach the 12 claws and remove the 6 headrest supports. Then remove the seatback cover with pad from the seatback frame.



    6. B084940E02
    7. Remove the hog rings and seatback cover from the seatback pad.



9. REMOVE NO. 1 SEAT CUSHION COVER


    B257930E01
  1. for TSAM Made:

    1. Remove the 2 screws and 2 cushions.

    2. Remove the hog rings.

    3. Open the 2 fasteners and remove the seat cushion cover with pad from the seat cushion frame.



    4. B084938E02
    5. Remove the hog rings and seat cushion cover from the seat cushion pad.



    B084937E02
  1. for TMT Made:

    1. Remove the 2 screws and 2 cushions.

    2. Remove the hog rings.

    3. Open the 2 fasteners and remove the seat cushion cover with pad from the seat cushion frame.



    4. B084938E02
    5. Remove the hog rings and seat cushion cover from the seat cushion pad.



10. REMOVE FOLD SEAT STOPPER BAND ASSEMBLY
  1. Remove the connecting wire and stopper band.

    NOTICE:
    The connecting wire cannot be reused.