DTC P2119/89 Throttle Actuator Control Throttle Body Range / Performance |
| DTC No. | DTC Detection Condition | Suspected Area |
| P2119/89 | Throttle valve opening angle continues to vary greatly from target opening angle |
|
| 1.CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC P2119/89) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch ON and turn the intelligent tester ON.
Enter the following menus: Powertrain / Engine and ECT / DTC.
Read DTCs.
| Display (DTC Output) | Proceed to |
| P2119/89 | A |
| P2119/89 and other DTCs | B |
|
| ||||
| A | |
| 2.CHECK IF DTC OUTPUT RECURS (DTC P2119/89) |
Turn the ignition switch ON and turn the intelligent tester ON.
Clear the DTCs (Click here).
Allow the engine to idle for 15 seconds.
Fully depress and release the accelerator pedal several times quickly.
Enter the following menus: Powertrain / Engine and ECT / DTC.
Read DTCs.
|
| ||||
| OK | ||
| ||