FRONT AXLE HUB BOLT > REPLACEMENT |
| 1. REMOVE FRONT WHEEL |
| 2. REMOVE FRONT DISC BRAKE CYLINDER ASSEMBLY LH (for 2WD) |
![]() |
Remove the 2 bolts and disc brake cylinder.
Support the brake cylinder securely.
| 3. REMOVE FRONT DISC BRAKE CYLINDER ASSEMBLY LH (for 4WD and Pre-Runner) |
![]() |
Remove the bolt and brake tube bracket from the steering knuckle.
![]() |
Remove the 2 bolts and disc brake cylinder.
Support the brake cylinder securely.
| 4. REMOVE FRONT DISC |
| 5. REMOVE FRONT AXLE HUB BOLT |
![]() |
Temporarily install 2 nuts to the hub bolts as shown in the illustration.
Using SST and a screwdriver, remove the hub bolt.
| 6. INSTALL FRONT AXLE HUB BOLT |
![]() |
Temporarily install a plate washer and nut to a new hub bolt as shown in the illustration.
Using a screwdriver to hold the front axle, install a new hub bolt by tightening the nut. Then remove the nut and plate washer.
Remove the 2 nuts from the hub bolts.
| 7. INSTALL FRONT DISC |
| 8. INSTALL FRONT DISC BRAKE CYLINDER ASSEMBLY LH (for 4WD and Pre-Runner) |
![]() |
Install the disc brake cylinder with the 2 bolts.
![]() |
Install the brake tube bracket to the steering knuckle with the bolt.
| 9. INSTALL FRONT DISC BRAKE CYLINDER ASSEMBLY LH (for 2WD) |
![]() |
Install the disc brake cylinder with the 2 bolts.
| 10. INSTALL FRONT WHEEL |