Home › BRAKE › BRAKE CONTROL › BRAKE ACTUATOR (for RHD with VSC)

BRAKE ACTUATOR (for RHD with VSC) > REASSEMBLY

for Preparation Click here



1. INSTALL BRAKE ACTUATOR BOLT CUSHION


    C191814E01
  1. Install the 3 cushions to the bracket.



2. INSTALL BRAKE ACTUATOR CASE COLLAR
  1. Install the 3 collars to the 3 cushions.



3. INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY


    C188010E03
  1. Install the actuator to the bracket with the 3 bolts.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

    NOTICE:
    Tighten the 3 nuts uniformly in alphabetical order.



    C189960
  1. Attach the tube clamp.