Home › BRAKE › BRAKE › LOAD SENSING PROPORTIONING VALVE (w/ VSC)

LOAD SENSING PROPORTIONING VALVE (w/ VSC) > REMOVAL

for Preparation Click here



1. DRAIN BRAKE FLUID

NOTICE:
Wash off brake fluid immediately if it comes in contact with any painted surface.



2. REMOVE BLEND PROPORTIONING VALVE ASSEMBLY WITH BRACKET


C190857
  1. Remove the 2 clips.

  1. Using a union nut wrench, disconnect the brake lines at the 6 points indicated by the arrows in the illustration.



    C190855
  1. Remove the 3 bolts and blend proportioning valve assembly with bracket.