DIFFERENTIAL OIL > ON-VEHICLE INSPECTION |
| 1. CHECK DIFFERENTIAL OIL |
![]() |
Stop the vehicle on a level surface.
Remove the differential filler plug and gasket.
Check that the oil level is between 0 to 5 mm (0 to 0.20 in.) from the bottom lip of the differential filler plug hole.
| Item | Temperature | Viscosity |
| Front differential (w/ A.D.D.) | SAE 75W-90 | |
| Front differential (w/o A.D.D.) Rear differential | Above -18°C (0°F) | SAE 90 |
| Below -18°C (0°F) | SAE 85W-90 | |
| Item | Oil type |
| Front differential Rear differential | Hypoid gear oil API GL-5 or equivalent |
| Rear differential (for LSD) | Hypoid gear oil LSD API GL-5 or equivalent |
| Item | Capacity |
| w/o A.D.D. | 1.40 to 1.50 liters (1.48 to 1.59 US qts., 1.23 to 1.31 Imp. qts.) |
| w/ A.D.D. | 1.60 to 1.70 liters (1.69 to 1.80 US qts., 1.40 to 1.50 Imp. qts.) |
| Item | Capacity |
| 2WD | 3.15 to 3.25 liters (3.30 to 3.43 US qts., 2.77 to 2.86 Imp. qts.) |
| 4WD | 3.30 to 3.40 liters (3.49 to 3.59 US qts., 2.90 to 2.99 Imp. qts.) |
Check for oil leakage when the oil level is low.
Install the differential filler plug with a new gasket.