Home › TRANSMISSION ยท A343F AUTOMATIC TRANSMISSION › FLOOR SHIFT ASSEMBLY

FLOOR SHIFT ASSEMBLY > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE TRANSFER SHIFT LEVER KNOB SUB-ASSEMBLY


3. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY


B087844E01
  1. Detach the 4 claws and remove the hole cover.



4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


B115418E02

NOTICE:
Be careful not to damage the instrument panel lower and console box with the claws of the console panel upper.

  1. Detach the 12 claws and remove the console panel.



5. REMOVE CONSOLE BOX ASSEMBLY


B090153E01
  1. Remove the 4 screws <F> and 2 bolts <E>.

  1. Using a clip remover, remove the 2 clips and console box.



6. REMOVE FLOOR SHIFT ASSEMBLY


G037854E01
  1. Disconnect the 2 connectors and clamp.

  1. Move the shift lever to L.

  1. Disconnect the transmission control cable.



    G037855E01
  1. Remove the 4 bolts.

  1. Remove the floor shift.