Home › TRANSMISSION ยท CLUTCH › CLUTCH PEDAL (for RHD)

CLUTCH PEDAL (for RHD) > REASSEMBLY

for Preparation Click here



1. INSTALL CUSHION (w/ Cruise Control System)


C191561
  1. Install the cushion to the clutch pedal.



2. INSTALL PEDAL SPRING HOOK (w/ Turn Over)


D033430E13
  1. Apply MP grease to the contact surface of the hook.

  1. Install the hook.



3. INSTALL CLUTCH PEDAL TURN OVER BUSH (w/ Turn Over)


D033296E11
  1. Apply MP grease to the contact surface of the bush.

  1. Install the bush.



4. INSTALL NO. 1 CLUTCH PEDAL CUSHION


D033294E03
  1. Install the cushion to the clutch pedal.



5. INSTALL COLLAR


D033293E15
  1. Apply MP grease to both ends of the collar and 2 new bushes.

  1. Install the collar.

  1. Install the 2 bushes.



6. INSTALL CLUTCH PEDAL SUB-ASSEMBLY


B112091
  1. Install the clutch pedal to the clutch pedal support with the bolt and nut.

    Torque:
    26 N*m{ 265 kgf*cm , 19 ft.*lbf }

    HINT:
    Install the bolt from the right side of the vehicle.



    D033429E02
  1. w/ Turn Over:
    Install the clutch pedal return spring.



7. INSTALL CLUTCH PEDAL SPRING HOLDER (w/ Turn Over)


D033292E09
  1. Apply MP grease to the contact surface of the clutch pedal spring holder.

  1. Install the clutch pedal spring holder.



8. INSTALL CLUTCH PEDAL SPRING (w/ Turn Over)


D033290
  1. Install the spring.