Home › BODY › WINDSHIELD / WINDOWGLASS › POWER WINDOW CONTROL SYSTEM

POWER WINDOW CONTROL SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



POWER WINDOW CONTROL SYSTEM DESCRIPTION
The power window control system controls the power windows' UP / DOWN function using the regulator motors.
for Single cab, Extra cab:
The main controls of this system are: the power window regulator master switch, which is built into the driver side door, and the power window regulator switch, which is built into the passenger side door. Pressing the regulator switch or either of the switches on the master switch transmits an UP / DOWN signal to the corresponding power window regulator motor.
for Double cab:
The main controls of this system are: the power window regulator master switch, which is built into the driver side door, and the power window regulator switches, which is built into the passenger side door and rear doors. Pressing the regulator switch or any of the switches on the master switch transmits an UP / DOWN signal to the corresponding power window regulator motor.
The jammed window detection mechanism consists of a magnet on the worm gear of the power window motor and the Hall ICs on the connector.

FUNCTION OF MAIN COMPONENT

Component
Outline
Power Window Regulator Master Switch Assembly
  1. Controls window operations for all windows
  2. When window lock switch is set to lock position, window operation will only be possible with master switch
Power Window Regulator Switch Assembly
  1. for Single cab, Extra cab:
    Located on passenger side door
  2. for Double cab:
    Located on passenger side door and rear doors
  3. Each regulator switch controls window operations for its respective window
Power Window Regulator Motor Assembly
  1. Receives switch signals and changes signals into motor activation to change window position
  2. Driver side regulator motor uses pulse sensors to detect window position

SYSTEM FUNCTION
The power window control system has the following functions.

Function
Outline
Manual UP / DOWN function
  1. for Driver side power window:
    Function that raises window while power window switch is pulled up, and lowers window while pushed halfway down (window stops as soon as switch is released)
  2. for Other power windows:
    Function that raises window while power window switch is pulled up, and lowers window while pushed down (window stops as soon as switch is released)
AUTO DOWN function
Function that enables window of driver side door to be fully opened by one full push downward on power window switch
AUTO UP / DOWN function*
w/ Jam protection:
Function that enables window of driver side door to be fully opened or fully closed by one full push downward or one full pull upward on power window switch, respectively
Jam protection function*
w/ Jam protection:
Function that automatically stops driver side power window and moves it downward if object is jammed in driver side power window during AUTO UP operation
Remote UP / DOWN function
for Single cab, Extra cab:
Function that allows power window master switch to control manual UP / DOWN operation of passenger side power window
Double cab:
Function that allows power window master switch to control manual UP / DOWN operation of passenger side power window and rear power windows
Window lock function
  1. for Single cab, Extra cab:
    Function where passenger side power window operation is disabled when window lock switch of master switch is pressed
    Passenger side power window can be operated when window lock switch is pressed again
  2. for Double cab:
    Function where passenger side power window and rear power window operation is disabled when window lock switch of master switch is pressed
    Passenger side power window and rear power windows can be operated when window lock switch is pressed again
Diagnosis*
  1. Function that allows power window switch to detect malfunctions in power window system and make diagnoses
  2. Power window switch light (AUTO light) illuminates or starts blinking to inform driver
Fail-safe*
  1. Function that disables driver side power window AUTO UP / DOWN function if pulse sensors (Hall ICs) in power window regulator motor have malfunction
  2. Manual operation is possible through power window switches

HINT:
* for Driver side