Home › BODY ELECTRICAL › WIPER AND WASHER › FRONT WASHER MOTOR

FRONT WASHER MOTOR > REMOVAL

for Preparation Click here



1. REMOVE FRONT FENDER LINER LH


B206028
  1. Using a clip remover, remove the 2 clips.

  1. Remove the 3 bolts and engine side cover.



2. DRAIN WASHER FLUID


    B210367
  1. Disconnect the washer hose from the windshield washer motor and pump, and drain the washer fluid.

    HINT:
    Use a container to collect the washer fluid.



3. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    B210368
  1. Disconnect the connector.

  1. Remove the windshield washer motor and pump.

    HINT:
    Use a container to collect the washer fluid.