Home › BODY ELECTRICAL › METER › METER / GAUGE SYSTEM

METER / GAUGE SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



METER GAUGE AND WARNING/INDICATOR LIGHT (for 1TR-FE)
*1: w/ Tachometer
*2: w/ Seat Belt Warning System
*3: w/ ABS
*4: w/ Airbag System
*5: w/ Fog Light
*6: w/ Vehicle Speed Reminder
*7: w/ Key Reminder Warning System
*8: w/ Seat Belt Reminder

Gauge 
Item
Signal Description
Speedometer
Calculates vehicle speed based on signal from vehicle speed sensor
Tachometer*1
Calculates engine speed based on signal from ECM
ODO/TRIP Meter
Calculates distance vehicle is driven or distance since trip meter knob is pressed
Fuel
Indicates remaining amount of fuel based on signal from fuel sender gauge
Engine Coolant Temperature
Indicates engine coolant temperature based on signal from ECM

Warning/Indicator Lights 
Item
Signal Description
TURN
Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON
HIGH BEAM
Illuminates when headlight dimmer switch is set to HI BEAM or FLASH
CHARGE
Illuminates when receiving malfunction signal from generator
OIL PRESSURE
Illuminates when receiving oil press is abnormally low (pressure switch is ON) signal
MIL
Illuminates when receiving malfunction signal from ECM
DOOR
Illuminates when receiving each door courtesy switch signal
SEAT BELT*2
Blinks when driver's seat belt buckle switch is unfastened
BRAKE
Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON
ABS*2
Illuminates when receiving malfunction signal from skid control ECU with actuator
SRS*3
Illuminates when receiving malfunction signal from center airbag sensor assembly
FUEL
Illuminates when receiving fuel empty signal from fuel sender gauge
FR FOG*4
Illuminates when receiving fog light switch signal
SPEED ALARM*5
Illuminates when vehicle speed 120 km/h (74 mph) or more

Buzzer 
Item
Signal Description
Vehicle Speed Reminder*6
Buzzer is ON when vehicle speed is 120 km/h (74 mph) or more
Key Reminder*7
Buzzer is ON when ignition switch is off, key is inserted and driver side door is open
Light Reminder*7
Buzzer is ON when ignition switch is off, light control switch is set to TAIL or HEAD and driver side door is open
Seat Belt Reminder*8
Buzzer is ON when ignition switch ON and driver side seat belt is unfastened

METER GAUGE AND WARNING/INDICATOR LIGHT (for 2TR-FE)
*1: w/ Tachometer
*2: w/ Seat Belt Warning System
*3: w/ ABS
*4: w/ Airbag System
*5: for 4WD
*6: for Automatic Transmission
*7: w/ Fog Light
*8: w/ Vehicle Speed Reminder
*9: w/ Key Reminder Warning System
*10: w/ Light Reminder Warning System
*11: w/ Seat Belt Reminder

Gauge 
Item
Signal Description
Speedometer
Calculates vehicle speed based on signal from vehicle speed sensor
Tachometer*1
Calculates engine speed based on signal from ECM
ODO/TRIP Meter
Calculates distance vehicle is driven or distance since trip meter knob is pressed
Fuel
Indicates remaining amount of fuel based on signal from fuel sender gauge
Engine Coolant Temperature
Indicates engine coolant temperature based on signal from ECM

Warning/Indicator Lights 
Item
Signal Description
TURN
Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON
HIGH BEAM
Illuminates when headlight dimmer switch is set to HI BEAM or FLASH
CHARGE
Illuminates when receiving malfunction signal from generator
OIL PRESSURE
Illuminates when receiving oil press is abnormally low (pressure switch is ON) signal
MIL
Illuminates when receiving malfunction signal from ECM
DOOR
Illuminates when receiving each door courtesy light switch signal
SEAT BELT*2
Blinks when driver's seat belt buckle switch is unfastened
BRAKE
Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON
ABS*3
Illuminates when receiving malfunction signal from skid control ECU with actuator
SRS*4
Illuminates when receiving malfunction signal from center airbag sensor assembly
FUEL
Illuminates when receiving fuel empty signal from fuel sender gauge
4WD*5
Illuminates when changing drivetrain from 2WD to 4WD
A/T OIL TEMP*5, *6
Illuminates when receiving ATF temperature is too high signal from ECM
A/T P*5, *6
Illuminates when receiving transfer shift lever is on N and automatic transmission shift lever is on P signal
FR FOG*7
Illuminates when receiving fog light switch signal
SPEED ALARM*8
Illuminates when vehicle speed 120 km/h (74 mph) or more

Buzzer 
Item
Signal Description
Vehicle Speed Reminder*8
When vehicle speed is 120 km/h (74 mph) or more, buzzer sounds
Key Reminder*9
Buzzer is ON when ignition switch is off, key is inserted and driver side door is open
Light Reminder*10
Buzzer is ON when ignition switch is off, light control switch is set to TAIL or HEAD, and driver side door is open
Seat Belt Reminder*11
Buzzer is ON when ignition switch ON and driver side seat belt is unfastened

METER GAUGE AND WARNING/INDICATOR LIGHT (for 1GR-FE)
*1: w/ ABS
*2: for 4WD
*3: for Automatic Transmission
*4: w/ Automatic Transmission Shift Indicator Light
*5: w/ Cruise Control System
*6: w/ Fog Light
*7: w/ Rear Differential Lock System
*8: w/ Key Reminder Warning System

Gauge 
Item
Signal Description
Speedometer
Calculates vehicle speed based on signal from vehicle speed sensor
Tachometer
Calculates engine speed based on signal from ECM
ODO/TRIP Meter
Calculates distance vehicle is driven or distance since trip meter knob is pressed
Fuel
Indicates remaining amount of fuel based on signal from fuel sender gauge
Engine Coolant Temperature
Indicates engine coolant temperature based on signal from ECM

Warning/Indicator Lights 
Item
Signal Description
TURN
Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON
HIGH BEAM
Illuminates when headlight dimmer switch is set to HI BEAM or FLASH
CHARGE
Illuminates when receiving malfunction signal from generator
OIL PRESSURE
Illuminates when receiving oil press is abnormally low (pressure switch is ON) signal
MIL
Illuminates when receiving malfunction signal from ECM
DOOR
Illuminates when receiving each door courtesy light switch signal
SEAT BELT
Blinks when driver's seat belt buckle switch is unfastened
BRAKE
Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON
ABS*1
Illuminates when receiving malfunction signal from skid control ECU with actuator
SRS
Illuminates when receiving malfunction signal from center airbag sensor assembly
FUEL
Illuminates when receiving fuel empty signal from fuel sender gauge
4WD*2
Illuminates when changing drivetrain from 2WD to 4WD
A/T OIL TEMP*3
Illuminates when receiving ATF temperature is too high signal from TCM
P*4
Illuminates when receiving P signal from park / neutral position switch
R*4
Illuminates when receiving R signal from park / neutral position switch
N*4
Illuminates when receiving N signal from park / neutral position switch
D*4
Illuminates when receiving D signal from shift lock control ECU
4*4
Illuminates when receiving 4 signal from shift lock control ECU
3*4
Illuminates when receiving 3 signal from shift lock control ECU
2*4
Illuminates when receiving 2 signal from park / neutral position switch
L*4
Illuminates when receiving L signal from park / neutral position switch
A/T P*3
Illuminates when receiving transfer shift lever is on N and automatic transmission shift lever is on P signal
CRUISE*5
Illuminates when receiving cruise control system is operating properly signal from ECM
TAIL*4
Illuminates when light control switch is set to TAIL or HEAD
FR FOG*6
Illuminates when receiving fog light switch signal
REAR DIFFERENTIAL LOCK*7
Illuminates when receiving rear differential lock signal from four wheel drive control ECU

Buzzer 
Item
Signal Description
Key Reminder*8
Buzzer is ON when ignition switch is off, key is inserted and driver side door is open
Light Reminder
Buzzer is ON when ignition switch is off, light control switch is set to TAIL or HEAD, and driver side door is open

METER GAUGE AND WARNING/INDICATOR LIGHT (for 1KD-FTV)
*1: w/ ABS
*2: for 4WD
*3: for Automatic Transmission
*4: w/ Automatic Transmission Shift Indicator Light
*5: for A750F
*6: Except A750F
*7: w/ Cruise Control System
*8: w/ Fog Light
*9: w/ Rear Fog Light
*10: w/ Rear Differential Lock System
*11: w/ Oil Level Indicator Light
*12: w/ Oil Changer Indicator Light
*13: w/ VSC
*14: w/ Key Reminder Warning System
*15: for Australia and Europe
*16: for Middle East

Gauge 
Item
Signal Description
Speedometer
Calculates vehicle speed based on signal from vehicle speed sensor
Tachometer
Calculates engine speed based on signal from ECM
ODO/TRIP Meter
Calculates distance vehicle is driven or distance since trip meter knob is pressed
Fuel
Indicates remaining amount of fuel based on signal from fuel sender gauge
Engine Coolant Temperature
Indicates engine coolant temperature based on signal from ECM

Warning/Indicator Lights 
Item
Signal Description
TURN
Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON
HIGH BEAM
Illuminates when headlight dimmer switch is set to HI BEAM or FLASH
CHARGE
Illuminates when receiving malfunction signal from generator
OIL PRESSURE
Illuminates when receiving oil press is abnormally low (pressure switch is ON) signal
MIL
Illuminates when receiving malfunction signal from ECM
DOOR
Illuminates when receiving each door courtesy light switch signal
SEAT BELT
Blinks when driver's seat belt buckle switch is unfastened
BRAKE
Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON, or brake vacuum warning switch is ON
ABS*1
Illuminates when receiving malfunction signal from skid control ECU with actuator
GLOW
Illuminates when receiving engine is too cold to start (glow heater is ON) signal from ECM
FUEL FILTER
Illuminates when fuel filter is clogged and blinks when certain amount of water is accumulated at bottom of fuel filter
SRS
Illuminates when receiving malfunction signal from center airbag sensor assembly
FUEL
Illuminates when receiving fuel empty signal from fuel sender gauge
T-BELT
Illuminates when odometer's display is 150000 km/h
4WD*2
Illuminates when changing drivetrain from 2WD to 4WD
A/T OIL TEMP*2, *3
Illuminates when receiving ATF temperature is too high signal from TCM
P*4
Illuminates when receiving P signal from park / neutral position switch
R*4
Illuminates when receiving R signal from park / neutral position switch
N*4
Illuminates when receiving N signal from park / neutral position switch
D*4
Illuminates when receiving D signal from shift lock control ECU
4*4, *5
Illuminates when receiving 4 signal from shift control ECU
3*4
  1. Illuminates when receiving 2 signal from park / neutral position switch*5
  2. Illuminates when receiving 3 signal from shift lock control ECU*6
2*4
  1. Illuminates when receiving 2 signal from shift lock control ECU*5
  2. Illuminates when receiving 2 signal from park / neutral position switch*6
L*4
  1. Illuminates when receiving L signal from shift lock control ECU*5
  2. Illuminates when receiving L signal from park / neutral position switch*6
A/T P*2, *3
Illuminates when receiving transfer shift lever is on N and automatic transmission shift lever is on P signal
CRUISE*7
Illuminates when receiving cruise control system is operating properly signal from ECM
TAIL*4
Illuminates when light control switch is set to TAIL or HEAD
FR FOG*8
Illuminates when receiving fog light switch signal
RR FOG*9
Illuminates when receiving rear fog light switch signal
REAR DIFFERENTIAL LOCK*10
Illuminates when receiving rear differential lock signal from four wheel drive control ECU
OIL LEVEL*11
Illuminates when receiving amount of engine oil is not sufficient signal for engine oil level sensor
OIL CHANGE*12
Illuminates when the receiving oil change signal from ECM
VSC OFF*13
Illuminates when receiving VSC OFF switch is ON signal from skid control ECU with actuator
SLIP*13
Illuminates when receiving malfunction signal from skid control ECU with actuator

Buzzer 
Item
Signal Description
Key Reminder*14
Buzzer is ON when ignition switch is off, key is inserted and driver side door is open
Light Reminder
Buzzer is ON when ignition switch is off, light control switch is set to TAIL or HEAD, and driver side door is open
Seat Belt Reminder*15
Buzzer is ON when vehicle speed 15 km/h (9 mph) or more and driver side seat belt is unfastened
Seat Belt Reminder*16
Buzzer is ON when ignition switch ON and driver side seat belt is unfastened

METER GAUGE AND WARNING/INDICATOR LIGHT (for 2KD-FTV)
*1: w/ Seat Belt Warning System
*2: w/ ABS
*3: w/ Airbag System
*4: w/ Fog Light
*5: w/ Rear Fog Light
*6: w/ Rear Differential Lock System
*7: w/ Oil Level Indicator Light
*8: w/ Oil Changer Indicator Light
*9: w/ Vehicle Speed Reminder
*10: w/ Key Reminder Warning System
*11: for Australia and Europe
*12: for Middle East

Gauge 
Item
Signal Description
Speedometer
Calculates vehicle speed based on signal from vehicle speed sensor
Tachometer
Calculates engine speed based on signal from ECM
ODO/TRIP Meter
Calculates distance vehicle is driven or distance since trip meter knob is pressed
Fuel
Indicates remaining amount of fuel based on signal from fuel sender gauge
Engine Coolant Temperature
Indicates engine coolant temperature based on signal from ECM

Warning/Indicator Lights 
Item
Signal Description
TURN
Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON
HIGH BEAM
Illuminates when headlight dimmer switch is set to HI BEAM or FLASH
CHARGE
Illuminates when receiving malfunction signal from generator
OIL PRESSURE
Illuminates when receiving oil press is abnormally low (pressure switch is ON) signal
MIL
Illuminates when receiving malfunction signal from ECM
DOOR
Illuminates when receiving each door courtesy light switch signal
SEAT BELT*1
Blinks when driver's seat belt buckle switch is unfastened
BRAKE
Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON, or brake vacuum warning switch is ON
ABS*2
Illuminates when receiving malfunction signal from skid control ECU with actuator
GLOW
Illuminates when receiving engine is too cold to start (glow heater is ON) signal from ECM
FUEL FILTER
Illuminates when fuel filter is clogged and blinks when certain amount of water is accumulated at bottom of fuel filter
SRS*3
Illuminates when receiving malfunction signal from center airbag sensor assembly
FUEL
Illuminates when receiving fuel empty signal from fuel sender gauge
T-BELT
Illuminates when odometer's display is 150000 km/h
FR FOG*4
Illuminates when receiving fog light switch signal
RR FOG*5
Illuminates when receiving rear fog light switch signal
REAR DIFFERENTIAL LOCK*6
Illuminates when receiving rear differential lock signal from four wheel drive control ECU
OIL LEVEL*7
Illuminates when receiving amount of engine oil is not sufficient signal for engine oil level sensor
OIL CHANGE*8
Illuminates when the receiving oil change signal from ECM
SPEED ALARM*9
Illuminates when vehicle speed 120 km/h (74 mph) or more

Buzzer 
Item
Signal Description
Vehicle Speed Reminder*9
When vehicle speed is 120 km/h (74 mph) or more, buzzer sounds
Key Reminder*10
Buzzer is ON when ignition switch is off, key is inserted and driver side door is open
Light Reminder*10
Buzzer is ON when ignition switch is off, light control switch is set to TAIL or HEAD, and driver side door is open
Seat Belt Reminder*11
Buzzer is ON when vehicle speed 15 km/h (9 mph) or more and driver side seat belt is unfastened
Seat Belt Reminder*12
Buzzer is ON when ignition switch ON and driver side seat belt is unfastened

METER GAUGE AND WARNING/INDICATOR LIGHT (for 5L-E)
*1: w/ Seat Belt Warning System
*2: w/ ABS
*3: w/ Airbag System
*4: w/ Rear Differential Lock System

Gauge 
Item
Signal Description
Speedometer
Calculates vehicle speed based on signal from vehicle speed sensor
Tachometer
Calculates engine speed based on signal from ECM
ODO/TRIP Meter
Calculates distance vehicle is driven or distance since trip meter knob is pressed
Fuel
Indicates remaining amount of fuel based on signal from fuel sender gauge
Engine Coolant Temperature
Indicates engine coolant temperature based on signal from ECM

Warning/Indicator Lights 
Item
Signal Description
TURN
Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON
HIGH BEAM
Illuminates when headlight dimmer switch is set to HI BEAM or FLASH
CHARGE
Illuminates when receiving malfunction signal from generator
OIL PRESSURE
Illuminates when receiving oil press is abnormally low (pressure switch is ON) signal
MIL
Illuminates when receiving malfunction signal from ECM
DOOR
Illuminates when receiving each door courtesy light switch signal
SEAT BELT*1
Blinks when driver's seat belt buckle switch is unfastened
BRAKE
Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON, or brake vacuum warning switch is ON
ABS*2
Illuminates when receiving malfunction signal from skid control ECU with actuator
GLOW
Illuminates when receiving engine is too cold to start (glow heater is ON) signal from ECM
FUEL FILTER
Illuminates when fuel filter is clogged and blinks when certain amount of water is accumulated at bottom of fuel filter
SRS*3
Illuminates when receiving malfunction signal from center airbag sensor assembly
FUEL
Illuminates when receiving fuel empty signal from fuel sender gauge
T-BELT
Illuminates when odometer's display is 150000 km/h
REAR DIFFERENTIAL LOCK*4
Illuminates when receiving rear differential lock signal from four wheel drive control ECU

COMBINATION METER HAS FOLLOWING FEATURES
  1. Built-in buzzer for the reminder system (light*1, key*2, seat belt*3 and vehicle speed*4)

    1. The warning buzzer sounds when: 1) a key is in the ignition key cylinder, the ignition switch is off and the driver side door is open*1; 2) the light control switch is set to TAIL or HEAD, the ignition switch is off and the driver side door is open*2; 3) the vehicle speed 15 (9 mph) or more and the driver side seat belt is unfastened*3, *5; 4) the ignition switch is ON and the driver side seat belt is unfastened*3, *6; or 5) the vehicle speed 120 km/h (74 mph) or more.

  2. Odometer and trip meter knob

    1. Press and release the knob to scroll through trip "A", trip "B" and odometer figures.
    1. Press and hold the knob to reset the trip meter.

  3. Multi-display*7

    1. The multi-display provides the following information: 1) outside temperature*8; 2) average fuel consumption for a certain distance; 3) instantaneous fuel consumption; 4) average speed for a certain distance; 5) runnable distance with the remaining amount of fuel; 6) compass; and 7) elapsed time since the ignition switch was turned ON.
    1. Press INFO to change the display item.
    1. Press RESET to clear the stored data.
    1. Press H to adjust the hour of the clock.
    1. Press M to adjust the minutes of the clock.
    1. Press 00 to set the minutes to 00.
    *1: w/ Light Reminder Warning System
    *2: w/ Key Reminder Warning System
    *3: w/ Seat Belt Reminder
    *4: w/ Vehicle Speed Reminder
    *5: for Australia and Europe
    *6: for Middle East
    *7: w/ Multi-display
    *8: for Automatic Air Conditioning System