FRONT SEAT OUTER BELT ASSEMBLY (for Power Seat) > INSTALLATION |
| 1. INSTALL SHOULDER BELT ANCHORAGE PLATE COVER |
![]() |
Install the plate cover as shown in the illustration.
| 2. INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY |
![]() |
Insert the tip of the adjuster to the pillar, and align the adjuster's bolt hole to the pillar's bolt hole.
Install the bolt as shown in the illustration.
| 3. INSTALL CENTER PILLAR GARNISH LH |
![]() |
Connect the front seat outer belt's shoulder anchor.
Connect the shoulder anchor with the bolt.
Attach the 4 claws to install the seat belt anchor cover cap.
![]() |
Attach the clip and claw to install the garnish.
| 4. INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH |
![]() |
w/o Pretensioner:
Align the claws with the seat belt positioning holes and install the ELR of the seat belt with the bolt as shown in the illustration.
![]() |
w/ Pretensioner:
Install the bolt and seat belt.
![]() |
w/ Pretensioner:
Connect the pretensioner connector as shown in the illustration.
![]() |
Extra cab and double cab:
Install the anchor with the bolt.
![]() |
Double cab:
Install the anchor of the seat belt with the built-in bolt after installing the center pillar garnish lower.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |